Cure kinetics of aqueous phenol–formaldehyde resins used for oriented strandboard manufacturing: Analytical technique
Authors:
- 30 January 2006
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 100 (2) , 1642-1650
Abstract
The cure kinetics of commercial phenol–formaldehyde (PF), used as oriented strandboard face and core resins, were studied using isothermal and dynamic differential scanning calorimetry (DSC). The cure of the face resin completely followed an nth‐order reaction mechanism. The reaction order was nearly 1 with activation energy of 79.29 kJ mol−1. The core resin showed a more complicated cure mechanism, including both nth‐order and autocatalytic reactions. The nth‐order part, with reaction order of 2.38, began at lower temperatures, but the reaction rate of the autocatalytic part increased much faster with increase in curing temperature. The total reaction order for the autocatalytic part was about 5. Cure kinetic models, for both face and core resins, were developed. It is shown that the models fitted experimental data well, and that the isothermal DSC was much more reliable than the dynamic DSC in studying the cure kinetics. Furthermore, the relationships among cure reaction conversion (curing degree), cure temperature, and cure time were predicted for both resin systems. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1642–1650, 2006Keywords
This publication has 21 references indexed in Scilit:
- Cure kinetics of carbon nanotube/tetrafunctional epoxy nanocomposites by isothermal differential scanning calorimetryJournal of Polymer Science Part B: Polymer Physics, 2004
- Determination of curing kinetic parameters of lignin–phenol–formaldehyde resol resins by several dynamic differential scanning calorimetry methodsThermochimica Acta, 2004
- Cure kinetics of epoxy resin and aromatic diaminesJournal of Applied Polymer Science, 2004
- Evaluation of the cure kinetics of isocyanate reactive hot-melt adhesives with differential scanning calorimetryJournal of Applied Polymer Science, 2003
- Curing process of powdered phenol–formaldehyde resol resins and the role of water in the curing systemsJournal of Applied Polymer Science, 2003
- Curing kinetics of boron‐containing phenol–formaldehyde resin formed from paraformaldehydeInternational Journal of Chemical Kinetics, 2002
- Isothermal cure kinetics of epoxy/phenol-novolac resin blend system initiated by cationic latent thermal catalystJournal of Polymer Science Part A: Polymer Chemistry, 2000
- The kinetics of cure of epoxides and related sulphur compounds studied by dynamic DSCPolymer, 2000
- Wood‐induced catalytic activation of PF adhesives autopolymerization vs. PF/wood covalent bondingJournal of Applied Polymer Science, 1994
- The Effect of Lignin Content on the Cure Properties of Phenol-Formaldehyde Resin as Determined by Differential Scanning CalorimetryHolzforschung, 1993