Real Time Investigation of the Interface between a P3HT:PCBM Layer and an Al Electrode during Thermal Annealing
- 13 July 2009
- journal article
- research article
- Published by Wiley in Macromolecular Rapid Communications
- Vol. 30 (14) , 1269-1273
Abstract
Real time variation of the interfacial structure between an Al electrode and a poly(3-hexylthiophene) (P3HT):fullerene (PCBM) thin film during thermal annealing has been investigated using synchrotron X-rays. It is found that Al atoms diffuse into the organic layer to form a thin interlayer between the Al electrode and the organic layer even during the deposition of an Al layer. The interlayer thickness and the mass density of the interlayer increases if annealed above 120 °C. The interlayer thickness depends on the annealing processes and the inter-diffusion is accelerated by a fast annealing process. The Al diffusion reduces the preferred alignment of the (100) direction of the P3HT crystals from the surface normal direction and randomizes their orientation. The Al diffusion also helps to reduce the contact resistance in the P3HT:PCBM-based solar cells.Keywords
This publication has 21 references indexed in Scilit:
- The importance of post-annealing process in the device performance of poly(3-hexylthiophene): Methanofullerene polymer solar cellSolar Energy Materials and Solar Cells, 2007
- Efficient inverted polymer solar cellsApplied Physics Letters, 2006
- Accelerated lifetime measurements of P3HT:PCBM solar cellsSynthetic Metals, 2006
- Open circuit voltage of stacked bulk heterojunction organic solar cellsApplied Physics Letters, 2006
- Temperature and Time Dependence of Heat Treatment of RR-P3HT/PCBM Solar CellSynthetic Metals, 2005
- Thermally Stable, Efficient Polymer Solar Cells with Nanoscale Control of the Interpenetrating Network MorphologyAdvanced Functional Materials, 2005
- Investigation of annealing effects and film thickness dependence of polymer solar cells based on poly(3-hexylthiophene)Journal of Applied Physics, 2005
- Absorption spectra modification in poly(3-hexylthiophene):methanofullerene blend thin filmsChemical Physics Letters, 2005
- Organic photovoltaics: technology and marketSolar Energy Materials and Solar Cells, 2004
- 2.5% efficient organic plastic solar cellsApplied Physics Letters, 2001