Rotating Probe Measurements of the Pump Passage Flow Field in an Automotive Torque Converter
Authors:
- 3 October 2000
- journal article
- Published by ASME International in Journal of Fluids Engineering
- Vol. 123 (1) , 81-91
Abstract
The relative flow in an automotive torque converter pump passage was measured at three locations inside the passage (mid-chord, 3/4-chord, and 4/4-chord) using a miniature high-frequency response five-hole probe in the pump rotating frame. A custom-designed brush-type slip-ring unit is used in the rotating probe system to transmit the amplified signal from the probe in the rotating frame to the stationary frame. At speed ratio of 0.6, a weak “jet-wake” flow pattern is observed at the pump mid-chord. High flow loss is observed in the core-suction corner due to the “wake” flow caused by the flow separation. A strong clockwise secondary flow is found to dominate the flow structure at the pump mid-chord. The Coriolis force and the through flow velocity deficit near the core at the pump inlet are the main reasons for this secondary flow. The jet-wake flow pattern at the 3/4-chord is enhanced by the upstream secondary flow. A jet-wake flow pattern is also observed at the pump 4/4-chord, with concentration of the flow near the passage pressure side. The secondary flow changes its direction of rotation from the 3/4-chord to 4/4-chord. This is mostly caused by the passage meridional curvature and the flow concentration. High loss is found in the core-suction corner wake flow due to a low kinetic energy flow accumulation and the flow separation. Finally, the pump flow field is assessed through the mass-averaged total pressure and relative pressure loss parameter. The data are also analyzed to assess the effect of the speed ratio on the flow field.Keywords
This publication has 8 references indexed in Scilit:
- Experimental Investigation of the Flow Field in an Automotive Torque Converter StatorJournal of Fluids Engineering, 1999
- Steady and Unsteady Flow Field at Pump and Turbine Exits of a Torque ConverterJournal of Fluids Engineering, 1998
- Experimental Investigation of Steady and Unsteady Flow Field Downstream of an Automotive Torque Converter Turbine and Inside the Stator: Part II—Unsteady Pressure on the Stator Blade SurfaceJournal of Turbomachinery, 1997
- Experimental Investigation of Steady and Unsteady Flow Field Downstream of an Automotive Torque Converter Turbine and Inside the Stator: Part I—Flow at Exit of TurbineJournal of Turbomachinery, 1997
- Fluid Dynamics and Heat Transfer of Turbomachinery1995
- Measurement and Analysis of Static Pressure Field in a Torque Converter PumpJournal of Fluids Engineering, 1995
- Laser Velocimeter Measurements in the Pump of an Automotive Torque Converter: Part II — Unsteady Measurements1994
- Laser Velocimeter Measurements in the Pump of an Automotive Torque Converter: Part I — Average Measurements1994