Influence of Laser-Welding on Microstructure and Corrosion Properties of Twinning-Induced Plasticity (TWIP) Steel
Open Access
- 28 September 2020
- Vol. 13 (19) , 4315
Abstract
The effect of welding speed on microstructure, mechanical properties, and corrosion properties of laser-assisted welded joints of a twinning-induced plasticity (TWIP) steel was investigated by using X-ray diffraction (XRD), scanning electron microscopy (SEM), electron backscattered diffraction (EBSD) analysis, electrochemical test, and micro-area scanning Kelvin probe test (SKP). The results reveal that the welded joints, with a fully austenitic structure, are obtained by laser welding. In addition, the preferred orientation of grains in fusion zone (FZ) increased with the increase of welding speed. Additionally, the coincidence site lattice (CSL) grain boundaries of FZ decreased with increasing welding speed. However, potentiodynamic polarization and SKP results demonstrated that the welding speed of 1.5 m/min renders superior corrosion resistance. It can also be inferred that the corrosion properties of the welded joints are related to the grain size and frequency of CSL grain boundary in FZ.Keywords
Funding Information
- National Natural Science Foundation (U1837602)
- Natural Science Foundation of Beijing Municipality (Z201100004520011)
This publication has 40 references indexed in Scilit:
- Autogenous Fiber Laser Welding of 316L Austenitic and 2304 Lean Duplex Stainless SteelsMaterials, 2020
- Heat Source Models in Numerical Simulations of Laser WeldingMaterials, 2020
- Thermo-Mechanical Simulation of Hybrid Welding of DP/AISI 316 and TWIP/AISI 316 Dissimilar WeldMaterials, 2020
- Twinning-induced plasticity (TWIP) steelsActa Materialia, 2018
- Evaluation on Fatigue Performance and Fracture Mechanism of Laser Welded TWIP Steel Joint Based on Evolution of Microstructure and Micromechanical PropertiesJournal of Iron and Steel Research International, 2016
- Performance and Characterization of TWIP Steels for Automotive ApplicationsMaterials Performance and Characterization, 2013
- Welding of twinning-induced plasticity steelsScripta Materialia, 2012
- Formability of TWIP (twinning induced plasticity) automotive sheetsInternational Journal of Plasticity, 2011
- Effect of grain and twin boundaries on the hardening mechanisms of twinning-induced plasticity steelsScripta Materialia, 2008
- Modeling of mechanical twinning in a high manganese content austenitic steelMaterials Science and Engineering: A, 2004