Strength prediction of composite π joint under bending load and study of geometric and material variations effects
Authors:
- 3 May 2012
- journal article
- research article
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 47 (8) , 1029-1038
Abstract
This article concentrates on the design of composite π joint, which is an effective connector for integrated composite structures in aerospace structures. A brief review of research on out-of-plane joints is first presented to current practice towards the design of such π joints. Progressive damage models are established to trace failure analysis from damage onset to ultimate collapse of joints, which highlight the failure mechanism and internal mechanical behaviours. Four kinds of failure criteria are used firstly, and after comparing the numerical prediction results with the experimental results, one failure criterion is chosen for the simulation of this joint. Influences of structural and geometric parameters such as structural configuration, overlaminate material, ply angle, fillet radius and upstanding/horizontal leg length of overlaminate on flexural resistance ability are studied to provide ‘optimal’ design schemes. Moment–displacement graphs from the mechanical experiments are presented and physical failure phenomena of the joint under bending load are depicted. The good agreement between the predictions and experimental results gives evidence of the efficiency of numerical analysis.Keywords
This publication has 24 references indexed in Scilit:
- Strength Prediction of Composite Π Joints Under Tensile LoadJournal of Composite Materials, 2010
- Tensile Strength Prediction of Woven Composite Bonded JointAdvanced Materials Research, 2010
- Progressive damage analysis of composite bolted joints with liquid shim layers using constant and continuous degradation modelsComposite Structures, 2010
- Bearing strength and failure behavior of bolted composite joints (part II: modeling and simulation)Composites Science and Technology, 2005
- Geometry and damage effects in a composite marine T-jointComposite Structures, 2004
- Finite Element Analysis of Composite Wing T-JointsJournal of Reinforced Plastics and Composites, 2002
- Progressive damage analysis of tee joints with viscoelastic insertsComposites Part A: Applied Science and Manufacturing, 2001
- A Progressive Damage Model for Mechanically Fastened Joints in Composite LaminatesJournal of Composite Materials, 1999
- A Progressive Damage Model for Laminated Composites Containing Stress ConcentrationsJournal of Composite Materials, 1987
- Effect of Curing Stresses on the First Ply-failure in Composite LaminatesJournal of Composite Materials, 1979