Evaluation of mechanical and performance characteristics of bitumen mixture using waste septage ash as partial substitute
Open Access
- 1 January 2025
- journal article
- research article
- Published by Walter de Gruyter GmbH in Journal of the Mechanical Behavior of Materials
- Vol. 34 (1)
Abstract
The aim of this research is to investigate the potential application of septage ash (SA) as a partial substitute for conventional fillers in Bitumen mixes. The study’s purpose was to evaluate the mechanical and performance characteristics of Bitumen mixes by incorporating varying amounts of SA into the filler. To achieve this, bitumen mix samples were prepared with different concentrations of SA (5, 10, 15, and 20% of the filler weight). The study’s initial focus was on analyzing the physical properties of the samples and determining the fundamental parameters of tiny crystallites using X-ray diffraction and specific surface area. Additionally, the strength, stiffness, resistance to velocity, temperature effects, and impact of water on the mixture were carefully evaluated by conducting Marshall stability tests, indirect tensile strength, Cantabro tests, Freezing and Thawing (F&T) tests, and Moisture susceptibility tests to determine their durability in the presence of water. The findings of this study indicate that incorporating SA improved the strength by 32%, reduced fine loss by 23% at an optimal 5.35% bitumen content, and increased moisture sensitivity by 15%. Overall, the experimental results suggest that waste SA can be used as a sustainable solution to improve the mechanical performance of the surface.Keywords
This publication has 37 references indexed in Scilit:
- Effects of finer gradation, temperature, warm mix additives, and compaction methods on density and performance of asphalt mixturesConstruction and Building Materials, 2023
- Gradation design and performance evaluation of modified asphalt mixture for bridge asphalt plug joint designConstruction and Building Materials, 2023
- Relationship between the physicochemical and electrostatic charge characteristics of filler materials on the morphological and adhesive Pull-Off tensile strength of asphalt masticsConstruction and Building Materials, 2022
- Experimental evaluation and recyclability potential of asphalt concrete mixtures with polyacrylonitrile fibersConstruction and Building Materials, 2022
- Homogeneity of filler distribution within asphalt mix – A microscopic studyConstruction and Building Materials, 2015
- Overview of bituminous mixtures made with recycled concrete aggregatesConstruction and Building Materials, 2015
- Laboratory investigation on volume proportioning scheme of mineral fillers in asphalt mixtureConstruction and Building Materials, 2014
- The properties of asphalt binder blended with variable quantities of recycled asphalt using short term and long term aging simulationsConstruction and Building Materials, 2012
- Effects of using asphaltite as filler on mechanical properties of hot mix asphaltConstruction and Building Materials, 2011
- Utilization of recycled brick powder as alternative filler in asphalt mixtureConstruction and Building Materials, 2011