Kinetics of Passive Film Growth on 304 Stainless Steel in H2SO4 Pickling Solution under Chemical Oxidation
Authors:
- 4 February 2018
- journal article
- research article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 74 (6) , 705-714
Abstract
H2SO4-H2O2 mixtures are a promising and environmentally friendly passivation medium for the stainless-steel pickling process. The corrosion behavior of stainless steel is highly dependent on the kinetics of passive film growth. Long-term electrochemical measurements, including polarization resistance, open circuit potential (OCP), and electrochemical impedance spectroscopy (EIS) measurements were performed to investigate the evolution of the passive state of 304 stainless steel. According to the OCP results, an active-passive transition takes place in 10 ks in 0.5 M H2SO4 solution containing 0.005 M to 0.3 M H2O2. Polarization resistance results indicate that the passive film thickness keeps growing after OCP stabilization in the presence of H2O2. Electrochemical impedance spectroscopy (EIS) results confirmed that the growth of the passive film in H2SO4-H2O2 solutions takes about 9 h. Additionally, according to the Point Defect Model (PDM) and Mott–Schottky analysis, the semiconductor properties of the passive film on 304 stainless steel in H2SO4-H2O2 solution were studied. The results indicate that the passive film is an n-type semiconductor. The donor density is in the range of 1.6 × 10−21 cm−3 to 24 and decreases exponentially with increasing film formation potential (this potential coincides with the final OCP in the corresponding H2SO4-H2O2 solutions). By postulating that most donors are oxygen vacancies, the point defect properties including diffusivity and electrical field strength are obtained.Keywords
This publication has 50 references indexed in Scilit:
- Decapado de un acero inoxidable austenítico mediante mezclas ecológicas basadas en H2O2 - H2SO4 - iones F-Revista de Metalurgia, 2013
- Determination of effective capacitance and film thickness from constant-phase-element parametersElectrochimica Acta, 2010
- Constant-Phase-Element Behavior Caused by Resistivity Distributions in FilmsJournal of the Electrochemical Society, 2010
- Constant-Phase-Element Behavior Caused by Resistivity Distributions in FilmsJournal of the Electrochemical Society, 2010
- Chemical Pickling of 304 Stainless Steel in Fluoride- and Sulfate-Containing Acidic ElectrolytesJournal of the Electrochemical Society, 2005
- Environmentally friendly stainless steel picklingAnti-Corrosion Methods and Materials, 1997
- A new method for estimating the diffusivities of vacancies in passive filmsElectrochimica Acta, 1996
- Improvement in Descaling of Hot Strip by Hydrochloric Acid.ISIJ International, 1994
- Semiconducting properties of passive films on stainless steelsElectrochimica Acta, 1989
- Potentiostatic Anodic Pickling of Stainless SteelsJournal of the Electrochemical Society, 1971