Minimize Formation Damage in Water-Sensitive Unconventional Reservoirs by Using Energized Fracturing Fluid
Authors:
- 24 February 2016
- conference paper
- Published by Society of Petroleum Engineers (SPE)
Abstract
Slickwater has been widely used for hydraulic fracturing as it is inexpensive and able to carry proppants into the fracture. However, such fluid is unsuitable for water-sensitive formations, such as Montney. Water saturation around the fracture increases and clay swells when water leaks-off into matrix, both hindering natural gas flowing from matrix into fractures. N2 or CO2 energized water-based fracturing fluids have been widely used in water-sensitive formation as they can minimize fluid leak off during fracturing and achieve higher load fluid recovery during flow back. In this paper, multi-phase numerical simulations are applied to study the formation damage mitigation in Montney tight reservoir by using energized fracturing fluid. A simulation model is built and history matched with flow back and early production data of a typical Montney tight gas well. The behavior of multi-phase fluid leak off and flow back is studied, and the sensitivity of foam quality of fracturing fluid on load fluid recovery and well after stimulation productivity is analyzed. Statistical analysis is conducted on the stimulation and production data of over 5000 Montney wells to study the performance of energized fracturing in water-sensitive Montney formation. It is found that multi-phase fracturing fluid has less dynamic fluid leak off than that of a single phase fracturing fluid (i.e., water), and the major fluid leak off occurs during the static leak off period between the end of the stimulation processes and start of the flow back. Gas phase penetrates deeper and faster into the reservoir matrix in comparison with the liquid phase, which greatly contributes to flow back of fracturing fluid. Formation damage caused by fracturing fluid leak off can affect both early and long term production. In addition, N2-foam leads to the highest load fluid recovery in Montney formation, which is 1.6 times of that of CO2-foam. This work provides critical insights into understanding the performance of using energized fracturing fluid to mitigate formation damage in tight formations.Keywords
This publication has 14 references indexed in Scilit:
- Parametric study of fracture treatment parameters for ultra-tight gas reservoirsJournal of Petroleum Exploration and Production Technology, 2013
- Quantification of cm-Scale Heterogeneities in Tight-Oil Intervals of the Cardium Formation at Pembina, WCSB, Alberta, Canada.2012
- Multiphase Fluid-Loss Properties and Return Permeability of Energized Fracturing FluidsSPE Production & Operations, 2012
- Montney Fracturing-Fluid ConsiderationsJournal of Canadian Petroleum Technology, 2010
- Computer simulation of hydraulic fracturesInternational Journal of Rock Mechanics and Mining Sciences, 2007
- Tight Gas Sands-Permeability, Pore Structure, and ClayJournal of Petroleum Technology, 1982
- Factors Affecting Water Blocking and Gas Flow From Hydraulically Fractured Gas WellsJournal of Petroleum Technology, 1979
- Permeability Reduction Through Changes in pH and SalinityJournal of Petroleum Technology, 1965
- Influence of Chemical Composition of Water on Clay Blocking of PermeabilityJournal of Petroleum Technology, 1964
- Analytical Techniques for Recognizing Water- Sensitive Reservoir RocksJournal of Petroleum Technology, 1963