Optimal design of manipulator parameter using evolutionary optimization techniques
Authors:
- 7 July 2009
- journal article
- Published by Cambridge University Press (CUP) in Robotica
- Vol. 28 (3) , 381-395
Abstract
SUMMARY: A robot must have high positioning accuracy and repeatability for precise applications. However, variations in performance are observed due to the effect of uncertainty in design and process parameters. So far, there has been no attempt to optimize the design parameters of manipulator by which performance variations will be minimum. A modification in differential evolution optimization technique is proposed to incorporate the effect of noises in the optimization process and obtain the optimal design of manipulator, which is insensitive to noises. This approach has been illustrated by selecting optimal parameter of 2-DOF RR planar manipulator and 4-DOF SCARA manipulator. The performance of proposed approach has been compared with genetic algorithm with similar modifications. It is observed that the optimal results are obtained with lesser computations in case of differential evolution technique. This approach is a viable alternative for costly prototype testing, where only kinematic and dynamic models of manipulator are dealt with.Keywords
This publication has 22 references indexed in Scilit:
- Screening of factors influencing the performance of manipulator using combined array design of experiment approachRobotics and Computer-Integrated Manufacturing, 2009
- Application of genetic programming to the calibration of industrial robotsComputers in Industry, 2007
- A Genetic Algorithm Approach to solve for Multiple Solutions of Inverse Kinematics using Adaptive Niching and Clustering2006
- Task based kinematic design of a two DOF manipulator with a parallelogram five-bar link mechanismMechatronics, 2006
- Optimal placement of a two-link planar manipulator using a genetic algorithmRobotica, 2005
- New Optimization Techniques in Engineering2004
- Rapid response manufacturing through a rapidly reconfigurable robotic workcellRobotics and Computer-Integrated Manufacturing, 2001
- Probabilistic approach to manipulator kinematics and dynamicsReliability Engineering & System Safety, 2001
- Task-based optimization of modular robot configurations: minimized degree-of-freedom approachMechanism and Machine Theory, 2000
- Using a new GA-based multiobjective optimization technique for the design of robot armsRobotica, 1998