High Temperature Design and Damage Evaluation of MOD.9Cr-1Mo Steel Heat Exchanger
Authors:
- 10 September 2012
- journal article
- Published by ASME International in Journal of Pressure Vessel Technology
- Vol. 134 (5) , 051101
Abstract
High temperature design and evaluation of creep-fatigue damage for sodium-to-sodium heat exchanger, decay heat exchanger (DHX), in a sodium test loop have been conducted. The DHX is a shell- and tube-type heat exchanger with an outer diameter of 21.7 mm and effective length of 1.73 m. The DHX shell and tube materials were Mod.9Cr-1Mo steel. The temperatures of shell inlet and shell outlet in the DHX are 510 °C and 308 °C, respectively, while the temperatures of tube inlet and outlet are 254 °C and 475 °C, respectively. Three-dimensional finite element analysis was conducted for the DHX, and evaluation of creep-fatigue damage at several critical locations of the heat exchanger was carried out according to the elevated temperature design codes of the ASME Section III Subsection NH and RCC-MR. Evaluations on the integrity of the DHX and code comparisons were carried out for the critical locations of the DHX. The evaluation results showed that damages at the tubesheet joints of tube-to-tubesheet and tubesheet-to-shell were not so critical in the present DHX model.Keywords
This publication has 10 references indexed in Scilit:
- An Evaluation of Creep-Fatigue Damage for the Prototype Process Heat Exchanger of the NHDD PlantJournal of Pressure Vessel Technology, 2011
- Materials Science Forum Vols. 654-656 | Scientific.NetMaterials Science Forum, 2010
- Evaluation of Creep-Fatigue Damage for Hot Gas Duct Structure of the NHDD PlantJournal of Pressure Vessel Technology, 2010
- Comparison of life of two types of decay heat exchangers used in prototype fast breeder reactorTransactions of the Indian Institute of Metals, 2010
- Structural design approach of steam generator made of modified 9Cr-1Mo for high temperature operationTransactions of the Indian Institute of Metals, 2010
- Creep-fatigue damage assessment of special type of sodium to air heat exchanger having toroidal shape headersTransactions of the Indian Institute of Metals, 2010
- Creep-fatigue crack behaviour of a mod. 9Cr-1Mo steel structure with weldmentsTransactions of the Indian Institute of Metals, 2010
- Study on creep-fatigue evaluation procedures for high-chromium steels—Part I: Test results and life prediction based on measured stress relaxationInternational Journal of Pressure Vessels and Piping, 2008
- Creep–fatigue damage for a structure with dissimilar metal welds of modified 9Cr–1Mo steel and 316L stainless steelInternational Journal of Fatigue, 2007
- Study on Type-IV Damage Prevention in High-Temperature Welded Structures of Next-Generation Reactor Plants: Part I — Fatigue and Creep-Fatigue Behavior of Welded Joints of Modified 9Cr-1Mo Steel2006