Phase Formation Features of Reactor Pressure Vessel Steels with Various Ni and Mn Content under Conditions of Neutron Irradiation at Increased Temperature
Open Access
Abstract
In this paper the phase formation and mechanical properties of VVER-type reactor pressure vessel (RPV) steels with various Ni (1.57–5.95 wt.%) and Mn (0.03–0.76 wt.%) content after neutron irradiation up to fluences in the range of (53–120) × 1022 n/m2 at 400 °C were studied. The possibility of carbonitride formation under these irradiation conditions is shown. In case of sufficient Ni (>1.5 wt.%) and Mn (>0.3 wt.%) content formation of Ni-Si-Mn precipitates is observed. Their chemical composition is close to G-phase and Γ2-phase and differs from that of radiation-induced precipitates in VVER-1000 RPV steels. This indicates the prerequisites for thermally conditioned mechanism of Ni-Si-Mn precipitates formation and growth at 400 °C enhanced by irradiation. It is also shown that the optimized steel manufacturing technology coupled with an ultralow Mn content (≤0.03 wt.%) in steel with increased up to 5.26 wt.% Ni content facilitates suppressing the Ni-Si-Mn precipitates and carbonitrides formation. This, in turn, reduces the contribution of the hardening embrittlement mechanism and, correspondingly, facilitates high radiation resistance of the steels with ultralow Mn content at the increased irradiation temperature (400 °C).Keywords
This publication has 29 references indexed in Scilit:
- Thermodynamic and kinetic modeling of Mn-Ni-Si precipitates in low-Cu reactor pressure vessel steelsActa Materialia, 2017
- Mechanisms of radiation embrittlement of VVER-1000 RPV steel at irradiation temperatures of (50–400)°CJournal of Nuclear Materials, 2017
- Study of the flux effect nature for VVER-1000 RPV welds with high nickel contentJournal of Nuclear Materials, 2017
- Characterisation of interfacial segregation to Cu-enriched precipitates in two thermally aged reactor pressure vessel steel weldsUltramicroscopy, 2015
- Evolution of manganese–nickel–silicon-dominated phases in highly irradiated reactor pressure vessel steelsActa Materialia, 2014
- Formation and evolution of MnNi clusters in neutron irradiated dilute Fe alloys modelled by a first principle-based AKMC methodJournal of Nuclear Materials, 2012
- Analysis of embrittlement of WWER-1000 RPV materialsInternational Journal of Pressure Vessels and Piping, 2012
- On the correlation between irradiation-induced microstructural features and the hardening of reactor pressure vessel steelsJournal of Nuclear Materials, 2010
- Characterization of high strength and high toughness Ni–Mo–Cr low alloy steels for nuclear applicationInternational Journal of Pressure Vessels and Piping, 2010
- Operation of the IR-8 reactor with IRT-3M type fuel assembliesNuclear Engineering and Design, 1998