Studying and analysis of deformation and stresses in horizontal-axis wind turbine using fluid-structure interaction method
- 30 October 2024
- journal article
- research article
- Published by SAGE Publications in Wind Engineering
- Vol. 49 (3) , 715-734
Abstract
Fluid-structure interaction (FSI) studies have become an important tool in the development of wind turbine blades as well as for analyzing and optimizing Horizontal Axis Wind Turbine (HAWT). The most essential elements for estimating the turbine blade strength to withstand extreme wind loads and aerodynamic performance are the blade deformation and the associated stresses. This study aims to compare the strength and analyze the deformation behavior of two models of HAWT blades. A three-dimensional model was created and loaded into a Finite Element (FE) model for analysis. The Computational Fluid Dynamics (CFD) investigation was coupled with the structural model using one-way FSI. In this article, the effect of the aerodynamics on the blade surface of a small HAWT has been studied numerically and experimentally. The airfoil used for the blade profile is S826 airfoil. To provide an appropriate displacement for static measurements, the blade in the experimental investigation is made of thermoplastic polyurethane material (TPU). It is noted that the current experimental findings verify the simulation results, and a comparison between the simulations and the experimental findings reveals a reasonable agreement. The numerical simulations are also implemented on a HAWT epoxy E-glass unidirectional (EEGUD) material. It can be concluded from this study that the blade deformation and stress on the blades are related to the wind speed. The deformation along the span length exhibits nonlinear variation that gradually increases from the blade root and reaches its maximum at the blade tip position. The tip deflection and equivalent stress were found to increase with an increase in wind speed. The dynamic analysis at different tip speed ratios shows the highest deformation at λ = 4, for wind speed of 20 m/s.Keywords
This publication has 32 references indexed in Scilit:
- Experimental study on small scale horizontal axis wind turbine of analytically-optimized blade with linearized chord twist angle profileEnergy, 2021
- Investigating the performance of a twisted modified Savonius rotorJournal of Wind Engineering and Industrial Aerodynamics, 2018
- Fluid structure interaction modelling of horizontal-axis wind turbine blades based on CFD and FEAJournal of Wind Engineering and Industrial Aerodynamics, 2016
- Structural optimisation of vertical-axis wind turbine composite blades based on finite element analysis and genetic algorithmComposite Structures, 2016
- 3D URANS analysis of a vertical axis wind turbine in skewed flowsJournal of Wind Engineering and Industrial Aerodynamics, 2015
- Comparison of BEM and CFD results for MEXICO rotor aerodynamicsJournal of Wind Engineering and Industrial Aerodynamics, 2015
- Validation of a CFD model of wind turbine wakes with terrain effectsJournal of Wind Engineering and Industrial Aerodynamics, 2013
- Structural optimization study of composite wind turbine bladeMaterials & Design (1980-2015), 2013
- Equations of motion for a rotor blade, including gravity, pitch action and rotor speed variationsWind Energy, 2007
- State of the art in wind turbine aerodynamics and aeroelasticityProgress in Aerospace Sciences, 2006