Tribology behaviors of Ti–Ni51.5 at% shape memory alloy with different microstructures and textures
Authors:
- 10 April 2021
- journal article
- research article
- Published by Wiley in Rare Metals
- Vol. 40 (12) , 3616-3626
Abstract
The microstructure characteristics of TiNi alloy were investigated to elucidate the active deformation mechanisms during hot rolling and the corresponding tribology performance. The deformation was mainly dominated by a combination of mechanical twinning involving the {114} B2 and {112} B2 twins, dislocations, and stacking faults during the manufacturing process. Moreover, various heat treatments were performed to differentiate the discrepancies in tribological behaviors of hot‐rolled and heat‐treated alloys. Hot‐rolled microstructures with high defect density approximate to nanoscale precipitates through aging as the wear resistance of the alloy improves, albeit it is softer compared to the aged one. As demonstrated by the X‐ray diffraction (XRD) results of the wear tracks, microstructures undergo the stress‐induced martensitic (SIM) transformation during dry sliding. From differential scanning calorimetry (DSC) analysis, the martensitic transformation temperature is lowered by defects in the austenite phase. The activation of the SIM transformation can be a sluggish process owing to the effect of twinning, where both primary and secondary twins are involved. Furthermore, a reversible transformation that is related to pseudoelasticity causes a decrease in wear volume at room temperature, which is higher than the austenite finish temperature. Meanwhile, abrasive wear advances toward adhesion. Additionally, the hot‐rolled sheet with γ fiber‐{111}//ND (normal direction) exhibits better wear resistance compared to the sheet with α fiber‐{100}//ND.Keywords
Funding Information
- National Natural Science Foundation of China (U1737204)
- National Natural Science Foundation of China (51673205)
- National Natural Science Foundation of China (U1737204)
- National Natural Science Foundation of China (51673205)
This publication has 43 references indexed in Scilit:
- Transmission electron microscopy investigation of dislocation slip during superelastic cycling of Ni–Ti wiresInternational Journal of Plasticity, 2011
- EBSD studies of the stress-induced B2–B19′ martensitic transformation in NiTi tubes under uniaxial tension and compressionActa Materialia, 2010
- On the origin of Lüders-like deformation of NiTi shape memory alloysJournal of the Mechanics and Physics of Solids, 2005
- Physical metallurgy of Ti–Ni-based shape memory alloysProgress in Materials Science, 2005
- Textures in cold-rolled and annealed Ti50Ni50 shape memory alloyScripta Materialia, 2004
- Ni4Ti3-precipitation during aging of NiTi shape memory alloys and its influence on martensitic phase transformationsActa Materialia, 2002
- The mechanism of multistage martensitic transformations in aged Ni-rich NiTi shape memory alloysActa Materialia, 2002
- Tension–compression asymmetry of the stress–strain response in aged single crystal and polycrystalline NiTiActa Materialia, 1999
- The role of texture in tension–compression asymmetry in polycrystalline NiTiInternational Journal of Plasticity, 1999
- The Stress Field Created by a Circular Sliding ContactJournal of Applied Mechanics, 1966