Short-Time Peeling of Large Anodic Porous Alumina Membranes from Al Substrates by Two-Layer Anodization Using Concentrated Sulfuric Acid
Open Access
- 1 January 2025
- journal article
- research article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 172 (1) , 013506
Abstract
Ordered anodic porous alumina membranes, which have a uniform cylindrical pore array with a high density, are promising materials for the precise filtration of target substances. We previously reported that when a sample that has undergone anodizing is re-anodized in concentrated sulfuric acid, a highly soluble alumina layer is formed at the bottom of the anodized oxide film. When the re-anodized sample was etched, the highly soluble alumina layer was selectively dissolved; thus, it was possible to obtain a large ordered anodic porous alumina membrane without cracks. In this study, we succeeded in reducing the time required for anodization and etching to obtain an alumina membrane by optimizing the anodization conditions using concentrated sulfuric acid. According to this method, after the alumina membrane was peeled off, it was possible to retain a regular pattern of depressions on the surface of the residual Al substrate, which acted as the starting points for the generation of pores during subsequent anodization. By repeating this process on a single Al substrate, we can repeatedly form an ordered anodic porous alumina membrane. The obtained ordered anodic porous alumina membranes can be used as filtration membranes, catalyst supports, and templates for preparing one-dimensional nanostructures.Keywords
Funding Information
- JSPS KAKENHI (JP24K01219)
This publication has 48 references indexed in Scilit:
- Tailoring dielectric constant via anodic aluminum oxide-based nanoparticle for boosting the output performance of a triboelectric nanogeneratorChemical Engineering Journal, 2024
- Ultrafast Plasmonic Hot Electron Transfer in Au Nanoantenna/MoS2 HeterostructuresAdvanced Functional Materials, 2016
- Self‐Supported Metallic Nanopore Arrays with Highly Oriented Nanoporous Structures as Ideally Nanostructured Electrodes for Supercapacitor ApplicationsAdvanced Materials, 2014
- Solution‐pH‐Modulated Rectification of Ionic Current in Highly Ordered Nanochannel Arrays Patterned with Chemical Functional Groups at Designed PositionsAdvanced Functional Materials, 2013
- WS2 nanoparticles–encapsulated amorphous carbon tubes: A novel electrode material for supercapacitors with a high rate capabilityElectrochemistry Communications, 2013
- Fabrication of Graphene Nanomesh by Using an Anodic Aluminum Oxide Membrane as a TemplateAdvanced Materials, 2012
- Nanoporous Anodic Alumina Barcodes: Toward Smart Optical BiosensorsAdvanced Materials, 2012
- Anodic alumina membranes with defined pore diameters and thicknesses obtained by adjusting the anodizing duration and pore opening/widening timeJournal of Solid State Electrochemistry, 2011
- Porous Alumina with Shaped Pore Geometries and Complex Pore Architectures Fabricated by Cyclic AnodizationSmall, 2009
- Detection of CO and O2 Using Tin Oxide Nanowire SensorsAdvanced Materials, 2003