The effects of adhesion on the tensile strength of steel-polymer sandwich composites
Authors:
- 23 October 2020
- journal article
- research article
- Published by Taylor & Francis in Advanced Composite Materials
- Vol. 30 (5) , 443-461
Abstract
Steel-polymer sandwich composites are relatively strong and lightweight materials. However, accurately predicting the mechanical properties of these materials has been challenging, presumably due to a lack of consideration of their interfacial properties. In this study, the interfacial adhesion in sandwich composites was systematically varied to evaluate its effects on mechanical properties, particularly tensile strength. Next, we investigated why the tensile capacity (strength) of each component is not fully realized for seemingly simple structures consisting of two steel layers and a core polymer layer when assuming relatively weak adhesion. The resulting interfacial properties of the sandwich composites were characterized and incorporated into a cohesive zone model for finite element simulation. The simulation results revealed that, in contrast to the strong adhesion case, weak adhesion leads to stress concentration around failed cohesive elements, resulting in earlier failure of constituent layers and thus a lowering of the overall tensile strength of the composite.Keywords
Funding Information
- National Research Foundation of Korea (2020R1A5A6017701)
- Research center for Strategic material by POSCO (2018Z093)
This publication has 39 references indexed in Scilit:
- Metal–polymer–metal sandwiches with local metal reinforcements: A study on formability by deep drawing and bendingComposite Structures, 2011
- An improved cohesive element for shell delamination analysesInternational Journal for Numerical Methods in Engineering, 2010
- Maleic anhydride grafted rubbers for metallic surfaces laminationJournal of Applied Polymer Science, 2008
- Simulation of pin-reinforced single-lap composite jointsComposites Science and Technology, 2006
- A study on the damping characteristics of laminated composites with integral viscoelastic layersComposite Structures, 2006
- Metal sandwich plates with polymer foam-filled coresJournal of Mechanics of Materials and Structures, 2006
- Extended finite element method for cohesive crack growthEngineering Fracture Mechanics, 2002
- Stress distribution in sandwich beams under tensionComposite Structures, 1999
- Damping behaviour of dynamically cured butyl rubber/polypropylene blendsPolymer, 1994
- A Longitudinal Compression Test for Composites Using a Sandwich SpecimenJournal of Composite Materials, 1992