Free-Flowing Shear-Thinning Liquid Film in Inclined μ-Channels
Open Access
Abstract
Among the most important variables in the design of falling film microreactors (FFMRs) is the liquid film thickness as well as the gas/liquid interfacial area, which dictate the mass and heat transfer rates. In a previous work conducted in our lab the characteristics of a free-falling Newtonian liquid film have been studied and appropriate correlations have been proposed. In this work the geometrical characteristics of a non-Newtonian shear thinning liquid, flowing in an inclined open microchannel, have been experimentally investigated and design correlations that can predict with reasonable accuracy the features of a FFMR have been proposed. The test section used was an open μ-channel with square cross section (WO = 1200 μm) made of brass which can be set to various inclination angles. The liquid film characteristics were measured by a non-intrusive technique that is based on the features of a micro Particle Image Velocimetry (μ-PIV) system. Relevant computational fluid dynamics (CFD) simulations revealed that the volume average dynamic viscosity over the flow domain is practically the same as the corresponding asymptotic viscosity value, which can thus be used in the proposed design equations. Finally, a generalized algorithm for the design of FFMRs, containing non-Newtonian shear thinning liquids, is suggested.Keywords
All Related Versions
This publication has 12 references indexed in Scilit:
- Investigation of the liquid film thickness in an open-channel falling film micro-reactor by a stereo digital microscopyJournal of the Taiwan Institute of Chemical Engineers, 2019
- Gas–liquid mass transfer in a falling film microreactor: Effect of reactor orientation on liquid-side mass transfer coefficientChemical Engineering Science, 2016
- A study of wavy falling film flow on micro-baffled plateChemical Engineering Science, 2016
- Technique for quantitative mapping of three-dimensional liquid–gas phase boundaries in microchannel flowsInternational Journal of Multiphase Flow, 2014
- The present and future role of microfluidics in biomedical researchNature, 2014
- Investigation on meniscus shape and flow characteristics in open rectangular microgrooves heat sinks with micro-PIVApplied Thermal Engineering, 2013
- Mass transfer characterisation of a microstructured falling film at pilot scaleChemical Engineering Journal, 2013
- Paper-based microfluidic point-of-care diagnostic devicesLab on a Chip, 2013
- Micromixers—a review on passive and active mixing principlesChemical Engineering Science, 2005
- Elemental fluorineLab on a Chip, 2001