Effects of Lubricating oil on the performance of a Four-Intersecting-Vane Rotary Expander
Authors:
- A A MurthyAMA A Murthy
- S NorrisSNS Norris
- A SubiantoroASA Subiantoro
Open Access
- 1 September 2021
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 1180 (1)
Abstract
Lubrication plays an important aspect in machinery. It seals internal leakage gaps, reduces friction and cools components. The present investigation is intended to test the effects of lubrication to an expander’s performance. Polyester lubricating oil grades (Grade 48 and Grade 68) were tested at various operating conditions. The expander prototype is of the rotary mechanism with four vanes comprising two intersecting bars. An experimental test rig was designed and built. The pressure diagram as function of rotational angle was recorded by six pressure transducers arranged in the working chamber, based on which the features of the expansion process of the four-intersecting-vane rotary expander were analysed. To start with, the working fluid was compressed air, but the eventual intended application is in a vapour compression refrigeration system. The experimental study revealed that the rotary vane expander worked steadily at different operating conditions. The experimental results showed that the expander flow rate was generally lower with a thinner oil (POE grade 46), whereas the volumetric efficiency increased from 23.2% to 27.2%. The adiabatic efficiency decreased from 22.5% to 18.1% with a higher viscosity lubricating oil (POE grade 68).Keywords
This publication has 17 references indexed in Scilit:
- Thermal effect of lubricating oil in positive-displacement air compressorsApplied Thermal Engineering, 2013
- Experimental investigations of the revolving vane (RV-I) expanderApplied Thermal Engineering, 2013
- Analysis of the revolving vane (RV-0) expander, Part 1: Experimental investigationsInternational Journal of Refrigeration, 2012
- Simulation study on a novel vane-type expander with internal two-stage expansion process for R-410A refrigeration systemInternational Journal of Refrigeration, 2012
- Expanders for micro-CHP systems with organic Rankine cycleApplied Thermal Engineering, 2011
- Improved rotary vane expander for trans-critical CO2 cycle by introducing high-pressure gas into the vane slotsInternational Journal of Refrigeration, 2011
- Introduction of the Revolving Vane ExpanderHVAC&R Research, 2009
- Some design features of CO2 swing piston expanderApplied Thermal Engineering, 2006
- Cooling of oil injected screw compressors by oil atomisationApplied Thermal Engineering, 2005
- Numerical study on the lubrication oil distribution in a refrigeration rotary compressorInternational Journal of Refrigeration, 2003