Modeling and formation of a single-walled carbon nanotube (SWCNT) based heterostructure for efficient solar energy: Performance and defect analysis by numerical simulation
Open Access
- 1 November 2023
- journal article
- research article
- Published by AIP Publishing in AIP Advances
- Vol. 13 (11)
Abstract
This work introduces a new highly efficient heterostructure solar cell that shows the supremacy of the single-walled carbon nanotube as an absorber layer and platinum (Pt) as a back contact. This article focuses on the most important process: optimizing the thickness and acceptor concentration of the absorber layer. Another novel fact in this work is that minorities have been included as a replica of defects and the Auger hole/electron capture coefficient, and the variations in defects have been shown with some flawless contour plots. As the whole study has been carried out using a simulator, it might not be completely realistic, but it shows outcomes close to reality. In addition, the use of minorities takes this simulation work closer to the physical one. A contemporary model—Al/ZnO/TiO2/SWCNT/SnS/Pt—has been investigated in this work for efficient performance. At the end of tuning, the input parameters are set at thickness (W) = 1.5 µm, acceptor concentration (NA) = 1 × 1020 cm−3, and defects = 1 × 1015 cm−3. Under these optimum conditions, this model has shown outstanding outcomes: VOC = 1.04 V, JSC = 41.91 mA cm−2, FF = 72.12%, and η = 31.57%. Although an efficiency of 32.86% was achieved at NA = 1 × 1021 cm−3, it is difficult to keep the acceptor concentration high in reality. Hence, the optimum value of the acceptor concentration is considered at 1 × 1020 cm−3.Keywords
This publication has 31 references indexed in Scilit:
- Numerical Simulation of Carbon Nanotubes/GaAs Hybrid PV Devices with AMPS-1DInternational Journal of Photoenergy, 2014
- Carbon nanotube-based heterostructures for solar energy applicationsChemical Society Reviews, 2013
- The Role of Nanotubes in Carbon Nanotube–Silicon Solar CellsAdvanced Energy Materials, 2013
- Carbon nanotubes application as buffer layer in Cu(In,Ga)Se2 based thin film solar cellsPhysica E: Low-dimensional Systems and Nanostructures, 2013
- Titanium–Aluminum Bilayer Cathode for Small-Molecular Organic Solar Cells with Prolonged Life upon Exposure to AirJapanese Journal of Applied Physics, 2013
- Photovoltaic Effects in Asymmetrically Contacted CNT Barrier-Free Bipolar DiodeThe Journal of Physical Chemistry C, 2009
- Indium and Gallium: long-term supplyRenewable Energy Focus, 2008
- Carbon nanotube–nanocrystal heterostructures fabricated by electrophoretic depositionNanotechnology, 2008
- p -ZnO/n-GaN heterostructure ZnO light-emitting diodesApplied Physics Letters, 2005
- Modelling polycrystalline semiconductor solar cellsThin Solid Films, 2000