Analysis on performance of Eco-friendly Engineered Cementitious Composite for construction and environmental Sustainability
Preprint
- 12 August 2022
- preprint
- Published by Springer Nature in Research Square
Abstract
Engineered Cementitious Composite (ECC) is one of the versatile building components. The characteristics of materials and curing period are major factors that will influence the eco-friendly nature, and performance of the composite. In this experimental analysis, the impact of alkaline treated sisal fibres with different combinations of Polyvinyl alcohol (PVA) fibres (Mix-1 is 2% Sisal fibres, Mix-2 is 0.5% Sisal fibres + 1.5% PVA fibres) on the characteristics of Indian Zone II fine aggregates (50% river sand + 50% Manufactured sand) based ECC analyzed. For this, high fly ash to Cement dosage (f/c) of 1.4 is considered. These sisal fibres and f/c ratio are responsible for reduction in the disposal (or) environmental problems. The compressive strength of composite slightly improved from Mix-1 to Mix-2 at 28days with the decreased content of sisal fibres. But the split tensile and flexural characteristics highly increased by 8.33%, 5.45% from Mix-1 to Mix-2, respectively. These characteristics highly improved with the increased curing period (28days to 120days). The durability of the composite significantly influenced from 28days to 56days, but slightly improved with the decreased content of sisal fibres. To analyze these characteristics, SEM and XRD analysis are performed. Portlandite and quartz content was highly reduced (formation of C-S-H gel) from 28days to 56days due to hydration of unhydrated fly ash, fine aggregates, and other materials. The microstructure of both the mixes is densified with this gel. Mix-2 is more densified than Mix-1 due to the properties and arrangement of sisal fibres. These fibres are appropriately arranged in the partial replacement of PVA fibres compared to full dosage.Keywords
All Related Versions
This publication has 18 references indexed in Scilit:
- Micro and Nano Engineered High Volume Ultrafine Fly Ash Cement Composite with and without AdditivesInternational Journal of Concrete Structures and Materials, 2016
- Study on mechanical properties of cost-effective polyvinyl alcohol engineered cementitious composites (PVA-ECC)Construction and Building Materials, 2015
- Hydrophobic engineered cementitious composites for highway applicationsCement and Concrete Composites, 2015
- Influence of matrix flowability, fiber mixing procedure, and curing conditions on the mechanical performance of HTPP-ECCComposites Part B: Engineering, 2014
- Material properties of a new hybrid fibre-reinforced engineered cementitious compositeConstruction and Building Materials, 2013
- Improved fiber distribution and mechanical properties of engineered cementitious composites by adjusting the mixing sequenceCement and Concrete Composites, 2012
- Development of recycled strain-hardening cement-based composite (SHCC) for sustainable infrastructuresComposites Part B: Engineering, 2012
- Development of engineered cementitious composites with limestone powder and blast furnace slagMaterials and Structures, 2009
- Tensile and fiber dispersion performance of ECC (engineered cementitious composites) produced with ground granulated blast furnace slagCement and Concrete Research, 2007
- Environmental impact of demolition waste — An overview on 10 years of research and experienceWaste Management, 1996