Heat Transfer and Friction in a Low-Aspect-Ratio Rectangular Channel With Staggered Perforated Ribs on Two Opposite Walls
Authors:
- 1 November 1995
- journal article
- Published by Wiley in Journal of Heat Transfer
- Vol. 117 (4) , 843-850
Abstract
Experiments are conducted to study the turbulent heat transfer and friction in a low-aspect-ratio rectangular channel in which two opposite walls are roughened by perforated ribs. The perforated ribs are arranged in a staggered manner. Effects of perforated rib open-area ratio (β = 10, 22, 38, 44, and 50 percent), rib pitch-to-height ratio (PR = 5, 10, 15, and 20), rib height-to-channel hydraulic diameter ratio (H/De = 0.063 and 0.081), rib alignment (staggered and symmetric), and Reynolds number (10,000 ≤ Re ≤ 50,000) are examined. It is found that approximately the same heat transfer enhancement and pressure drop penalty are obtained between symmetric and staggered rib arrangements. A permeability criterion is proposed by tracing heat transfer coefficient distributions, which compares well with previous flow-visualization results. Results also show that ribs with β = 44 percent give the best thermal performance under either the constant friction power or the constant flow rate constraint. Roughness functions for friction and heat transfer are further developed in terms of rib and flow parameters.Keywords
This publication has 14 references indexed in Scilit:
- Effect of ridge shapes on turbulent heat transfer and friction in a rectangular channelInternational Journal of Heat and Mass Transfer, 1993
- Turbulent Heat Transfer Augmentation Using Microscale Disturbances Inside the Viscous SublayerJournal of Heat Transfer, 1992
- Turbulent Heat Transfer Augmentation and Friction in Periodic Fully Developed Channel FlowsJournal of Heat Transfer, 1992
- EXPRIMENTAL STUDY ON EFFECTS OF A SINGLE POROUS-TYPE ROUGHNESS ELEMENT IN A PARALLEL-PLATE DUCTExperimental Heat Transfer, 1991
- Turbulent Heat Transfer and Friction in a Square Channel With Discrete Rib TurbulatorsJournal of Turbomachinery, 1991
- Heat Transfer and Friction Characteristics in Rectangular Channels With Rib TurbulatorsJournal of Heat Transfer, 1988
- Heat Transfer and Friction in Channels With Two Opposite Rib-Roughened WallsJournal of Heat Transfer, 1984
- An investigation of heat transfer and friction for rib-roughened surfacesInternational Journal of Heat and Mass Transfer, 1978
- Heat transfer and friction in tubes with repeated-rib roughnessInternational Journal of Heat and Mass Transfer, 1971
- Heat and momentum transfer in smooth and rough tubes at various prandtl numbersInternational Journal of Heat and Mass Transfer, 1963