Experimental study on shear capacity of SRC joints with different arrangement and sizes of cross-shaped steel in column
Authors:
- Qiuwei WangQWQiuwei Wang
- Qingxuan ShiQSQingxuan Shi
- Hehe TianHTHehe Tian
- 10 June 2016
- journal article
- Published by Techno-Press in Steel and Composite Structures
- Vol. 21 (2) , 267-287
Abstract
Experimental study on shear capacity of SRC joints with different arrangement and sizes of cross-shaped steel in column steel reinforced concrete (SRC);beam-column joint;cross-shaped steel;quasi-static test;shear capacity; The seismic performance of the ordinary steel reinforced concrete (SRC) columns has no significant improvement compared to the reinforced concrete (RC) columns mainly because I, H or core cross-shaped steel cannot provide sufficient confinement for core concrete. Two improved SRC columns by constructing with new-type shaped steel were put forward on this background, and they were named as enlarging cross-shaped steel and diagonal cross-shaped steel for short. The seismic behavior and carrying capacity of new-type SRC columns have been researched theoretically and experimentally, while the shear behavior remains unclear when the new-type columns are joined onto SRC beams. This paper presents an experimental study to investigate the shear capacity of new-type SRC joints. For this purpose, four new-type and one ordinary SRC joints under low reversed cyclic loading were tested, and the failure patterns, load-displacement hysteretic curves, joint shear deformation and steel strain were also observed. The ultimate shear force of joint specimens was calculated according to the beam-end counterforce, and effects of steel shape, load angel and structural measures on shear capacity of joints were analyzed. The test results indicate that: (1) the new-type SRC joints display shear failure pattern and has higher shear capacity than the ordinary one; (2) the oblique specimens have good bearing capacity if designed reasonably; and (3) the two proposed construction measures have little effect on the shear capacity of SRC joints embedded with diagonal cross-shaped steel. Based on the mechanism observed from the test, the formulas for calculating ultimate shear capacity considering the main factors (steel web, stirrup and axial compression ratio) were derived, and the calculated results agreed well with the experimental and simulated data.Keywords
This publication has 10 references indexed in Scilit:
- Seismic behavior of steel reinforced concrete (SRC) T-shaped column-beam planar and 3D hybrid joints under cyclic loadsEarthquakes and Structures, 2015
- Experimental study on hysteretic properties of SRC columns with high steel ratioSteel and Composite Structures, 2014
- Behavior of Slender Steel-Concrete Composite Columns Wrapped with FRP JacketsJournal of Performance of Constructed Facilities, 2012
- Seismic behavior and moment strength of tubed steel reinforced-concrete (SRC) beam-columnsJournal of Constructional Steel Research, 2011
- Ultimate strength of composite structure with different degrees of shear connectionSteel and Composite Structures, 2011
- Experimental study on two types of new beam-to-column connectionsSteel and Composite Structures, 2011
- Seismic performance of steel reinforced ultra high-strength concrete composite frame jointsEarthquake Engineering and Engineering Vibration, 2010
- Effects of Continuity Plate and Transverse Reinforcement on Cyclic Behavior of SRC Moment ConnectionsJournal of Structural Engineering, 2007
- Numerical Analysis of Composite Steel-Concrete Columns of Arbitrary Cross SectionJournal of Structural Engineering, 2005
- Inelastic Force-Deformation Response of Joint Shear Panels in Beam-Column Moment Connections to Concrete-Filled TubesJournal of Structural Engineering, 2004