Research on crack evolution law and macroscopic failure mode of joint Phyllite under uniaxial compression
Authors:
Open Access
- 18 February 2021
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 11 (1) , 1-18
Abstract
In order to explore the fracture mechanism of jointed Phyllite, the TAJW-2000 rock mechanics test system is used to carry out uniaxial compression tests on different joint inclination Phyllites. The influence of joint inclination of Phyllite failure mode is discussed, and the progressive failure process of Phyllite is studied. The test results show that the uniaxial compressive strength anisotropy of jointed Phyllite is remarkable. As the inclination increases, it exhibits a U-shaped change; When 30° ≤ α ≤ 75°, the tensile and shear failures along the joint inclination mainly occurs. the joint inclination controls the failure surface form of the Phyllite; The crack initial stress level of the joint Phyllite is 0.30–0.59σf, the crack failure stress level is 0.44–0.86σf. When α = 90°, the σcd value is the largest, and σcd with α = 90° can be used as the maximum reliable value of uniaxial compressive strength of Phyllite. Using the theory of fracture mechanics, it is analyzed that under uniaxial compression of the rock, the crack does not break along the original crack direction, but extends along the direction at a certain angle to the original crack. The joint effect coefficient is proposed to show the influence of the joint inclination on the uniaxial compressive strength of the phyllite. Both the test and simulation results show that when the joint inclination is 60°, the joint effect coefficient is the largest. The compressive strength is the smallest. Numerical simulation analyses the crack evolution law of phyllite under different joint inclination under uniaxial compression, which verifies that there are different failure modes of joint phyllite under uniaxial compression.Keywords
Funding Information
- National Natural Science Foundation of China (41807245)
- Research on Natural Science in Shaanxi Province (2019JQ-218)
- Zhejiang Province Geological Disaster Prevention and Innovation Collaborative Innovation Center Open Fund (PCMGH-2017-Z-01)
- Scientific Innovation Practice Project of Postgraduates of Chang’an University (300103002036)
This publication has 16 references indexed in Scilit:
- Rock Fracture Toughness Study Under Mixed Mode I/III LoadingRock Mechanics and Rock Engineering, 2017
- Size-dependent fracture behavior of Guiting limestone under mixed mode loadingInternational Journal of Rock Mechanics and Mining Sciences, 2014
- Numerical analysis of quasi-static crack branching in brittle solids by a modified displacement discontinuity methodInternational Journal of Solids and Structures, 2014
- Rock fracture toughness study using cracked chevron notched Brazilian disc specimen under pure modes I and II loading – A statistical approachTheoretical and Applied Fracture Mechanics, 2014
- Factors Affecting Crack Initiation in Low Porosity Crystalline RocksRock Mechanics and Rock Engineering, 2013
- A failure criterion for transversely isotropic rocksInternational Journal of Rock Mechanics and Mining Sciences, 2001
- Effects of Grain Size on the Initiation and Propagation Thresholds of Stress-induced Brittle FracturesRock Mechanics and Rock Engineering, 1999
- The progressive fracture of Lac du Bonnet graniteInternational Journal of Rock Mechanics and Mining Sciences, 1994
- A failure condition for layered rockInternational Journal of Rock Mechanics and Mining Sciences, 1988
- Mechanism of brittle fracture of rockInternational Journal of Rock Mechanics and Mining Sciences, 1967