Utilizing 3D Printing and Distributed Optic Fiber to Achieve Temperature-Sensitive Concrete
Open Access
Abstract
The distribution of temperature-induced cracks in mass concrete structures is extensive and random, making it difficult for existing detection methods to accurately identify the specific location and initiation time of cracking. Therefore, there is an urgent need for an intelligent, precise, and efficient monitoring approach capable of acquiring real-time information on the evolution of the internal temperature field in concrete structures during their early-age curing process. A novel temperature-sensitive concrete system was developed by synchronously integrating distributed optical fibers with three-dimensional printed concrete (3DPC) to enable both temperature monitoring and signal transmission. To validate the effectiveness of the proposed method, experimental testing and numerical simulations were conducted on cubic 3D-printed fiber-reinforced concrete to analyze the temporal evolution of their internal temperature fields. The results show that, during the system calibration process, the temperature measured by the distributed temperature sensing (DTS) system was highly consistent with the environmental temperature curve, with fluctuations controlled within ±1 °C. In addition, the numerical simulation results closely aligned with the experimental data, with discrepancies maintained within 5%, demonstrating the feasibility of utilizing 3D printing technology to impart temperature sensitivity to concrete materials. This integrated approach offers a promising pathway for advancing smart concrete technology, providing an effective solution for accurate sensing and control of internal temperatures in concrete structures. It holds substantial potential for practical applications in civil engineering projects.Keywords
Funding Information
- Research Fund for Hubei Provincial Key Laboratory of Construction and Managemet in Hydropower Engineering, Three Gorges University (2023KSD018, 443002)
- Research Fund for Hubei International Science and Technology Cooperation Base of Fish Passage, China Three Gorges University (2023KSD018, 443002)
- 111 Project of Hubei Province (2023KSD018, 443002)
This publication has 37 references indexed in Scilit:
- Specifics of plastic shrinkage in 3D-printed concrete elementsCement and Concrete Research, 2024
- Vat photopolymerization 3D printing of polymer-derived SiOC ceramics with high precision and high strengthAdditive Manufacturing, 2023
- A review of self-sensing ultra-high performance concrete: Towards next-generation smart structural materialsCement and Concrete Composites, 2023
- Advanced measurement techniques for plastic shrinkage and cracking in 3D-printed concrete utilising distributed optical fiber sensorAdditive Manufacturing, 2023
- Thermal analysis of RCC dams during construction considering different ambient boundary conditions at the upstream and downstream facesJournal of Civil Structural Health Monitoring, 2022
- Prediction of thermal stresses in mass concrete structures with experimental and analytical resultsConstruction and Building Materials, 2020
- Transverse mechanical stress and optical birefringence induced into single-mode optical fibre embedded in a smart polymer composite materialComposite Structures, 2019
- Customising with 3D printing: The role of intelligent controlComputers in Industry, 2018
- Effective seismic strengthening and monitoring of a masonry vault by using Glass Fiber Reinforced Cementitious Matrix with embedded Fiber Bragg Grating sensorsComposites Part B: Engineering, 2017
- Fast Characterization of the Width of Vertical Cracks Using Pulsed Laser Spot Infrared ThermographyJournal of Nondestructive Evaluation, 2016