Study of the surface relief, structure and phase composition of the silumin composite layer obtained by the method of electric explosion alloying by Al-Y2O3 system
Open Access
- 27 November 2018
- conference paper
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1115 (3) , 032021
Abstract
The studies of the surface relief, structure and phase composition of silumin surface layer modified by the electric explosion of the aluminium conductor with the weighed sample of yttrium oxide were done by the methods of modern physical material science (atomic-force and transmission electron microscopy) in the research. It is stated that the multi-layer structure which consist of the highly porous coating inhomogeneous in thickness, the liquid phase alloying layer and the thermal effect layer, is formed in the top layer. It is revealed that the top layer possesses a submicro- and nanodimentional multi-phase structure. The particles of silicon, Y2O3, YSi2 and Y2Si2O7 are the hardening phases of this structure. It consists of the cellular crystallization structure being characterized by the inhomogeneity in the distribution of the alloying elements.Keywords
This publication has 10 references indexed in Scilit:
- Comparison of the effect of plasma treatment and gamma ray irradiation on PS-Cu nanocomposite films surfaceResults in Physics, 2018
- Influence of laser parameters in surface texturing of Ti6Al4V and AA2024-T3 alloysOptics and Lasers in Engineering, 2018
- Investigation on microstructure, mechanical and tribological properties of in-situ (TiB + TiC)/Ti composite during the electron beam surface meltingSurface and Coatings Technology, 2018
- Surface modification of 5CrMnMo steel with continuous scanning electron beam processVacuum, 2018
- Adhesion of NCF to oxidized Si wafers after oxygen plasma treatmentMicroelectronics Reliability, 2017
- Surface treatment of CFRP composites using femtosecond laser radiationOptics and Lasers in Engineering, 2017
- Formation and characterization of Al–Ti–Nb alloys by electron-beam surface alloyingApplied Surface Science, 2016
- Quality Index of the AlSi7Mg0.3 Aluminium Casting Alloy Depending on the Heat Treatment ParametersArchives of Foundry Engineering, 2016
- Influence of Heat Treatment on Abrasive Wear Resistance of Silumin Matrix Composite CastingsArchives of Metallurgy and Materials, 2016
- Surface modification by the EVU 60/10 electroexplosive systemSteel in Translation, 2011