Densification and reinforcement of carton boards through ultrasonic compression
Open Access
- 19 November 2026
- journal article
- Published by Walter de Gruyter GmbH in Holzforschung
Abstract
This study investigates the capability of an innovative converting process, ultrasonic compression, to densify and reinforce the mechanical properties of carton boards. Ultrasonic compression is a derivative of ultrasonic welding which consists in assembling materials by applying acoustic vibrations under pressure. Under the right conditions, it can provide enough heat and pressure to trigger the flow of amorphous wood polymers, leading to a modification of the material structure. Carton boards of the same structure and composition but different grammages were subjected to ultrasonic compression with different process parameters. Changes in physical properties were determined and structures were observed. Results showed that ultrasonic compression can successfully densify carton boards from 600 to 1,200 kg/m 3 without any degradation. The level of densification can easily be adjusted by controlling process parameters. Compressed carton boards showed enhanced in-plane tensile strength and elastic properties, with an increase in ultimate stress (from 25 to 50 MPa) and Young’ modulus (from 2 to 3 GPa), but also an expected decrease in the out-of-plane bending stiffness due to thickness reduction. However, specific mechanical properties were little affected, suggesting that the change in properties was mainly due to the increase in fiber volume fraction of the material.This publication has 19 references indexed in Scilit:
- Reinforcing folding board boxes by printing a PLA patterned grid on their panels: A new approach for lightweighting stiff packagingPackaging Technology and Science, 2022
- Ultrasonic welding of poly(vinyl alcohol) coated-papers hydrophobized by chromatogeny graftingCellulose, 2022
- On the role of fibre bonds on the elasticity of low-density papers: a micro-mechanical approachCellulose, 2021
- Experimental investigation and process optimization of the ultrasonic welding applied to papersMaterialwissenschaft und Werkstofftechnik, 2021
- Forming architectured paper by printing a starch patterned grid: a new low-cost approach for lightweighting packagingCellulose, 2021
- The role of lignin in wood working processes using elevated temperatures: an abbreviated literature surveyEuropean Journal of Wood and Wood Products, 2020
- Ultrasonic welding of 100% lignocellulosic papersJournal of Materials Science, 2019
- Effect of mechanically induced micro deformations on extensibility and strength of individual softwood pulp fibers and sheetsCellulose, 2018
- Influence of relative humidity on the strength of hardwood and softwood pulp fibres and fibre to fibre jointsCellulose, 2018
- Wood bonding by mechanically‐induced in situ welding of polymeric structural wood constituentsJournal of Applied Polymer Science, 2004