Theoretical and Experimental Study of an Electrokinetic Micromanipulator for Biological Applications
Open Access
- 15 January 2025
- journal article
- research article
- Published by MDPI AG in Biomimetics
- Vol. 10 (1)
Abstract
The ability to control and manipulate biological fluids within microchannels is a fundamental challenge in biological diagnosis and pharmaceutical analyses, particularly when buffers with very high ionic strength are used. In this study, we investigate the numerical and experimental study of fluidic biochips driven by ac electrothermal flow for controlling and manipulating biological samples inside a microchannel, e.g., for fluid-driven and manipulation purposes such as concentrating and mixing. By appropriately switching the voltage on the electrode structures and inducing AC electrothermal forces within the channel, a fluidic network with pumping and manipulation capabilities can be achieved, enabling the control of fluid velocity/direction and also fluid rotation. By using finite element analysis, coupled physics of electrical, thermal, fluidic fields, and molecular diffusion transport were solved. AC electrothermal flow was studied for pumping and mixing applications, and the optimal model was extracted. The microfluidic chip was fabricated using two processes: electrode structure development on the chip and silicon mold fabrication in a cleanroom. PDMS was prepared as the microchannel material and bonded to the electrode structure. After implementing the chip holder and excitation circuit, a biological buffer with varying ionic strengths (0.2, 0.4, and 0.6 [S/m]) was prepared, mixed with fluorescent particles, and loaded into the microfluidic chip. Experimental results demonstrated the efficiency of the proposed chip for biological applications, showing that stronger flows were generated with increasing fluid conductivity and excitation voltage. The system behavior was characterized using an impedance analyzer. Frequency response analysis revealed that for a solution with an electrical conductivity of 0.6 [S/m], the fluid velocity remained almost constant within a frequency range of 100 kHz to 10 MHz. Overall, the experimental results showed good agreement with the simulation outcomes.Keywords
This publication has 62 references indexed in Scilit:
- The impact of misaligned idiotropic and visual axes on spatial ability under altered visuospatial conditionsVirtual Reality, 2023
- Tuning AC Electrokinetic Flow to Enhance Nanoparticle Accumulation in Low‐Conductivity SolutionsAdvanced Materials Interfaces, 2023
- Electroosmotic flow: From microfluidics to nanofluidicsElectrophoresis, 2020
- Three dimensional simulation on binding efficiency of immunoassay for a biosensor with applying electrothermal effectHeat and Mass Transfer, 2013
- Electrokinetics and Electrohydrodynamics in Microsystems2011
- Bio‐microfluidics: Biomaterials and Biomimetic DesignsAdvanced Materials, 2009
- Electrokinetically driven flow mixing utilizing chaotic electric fieldsMicrofluidics and Nanofluidics, 2008
- A numerical study of an electrothermal vortex enhanced micromixerMicrofluidics and Nanofluidics, 2007
- Electroosmotic flow mixing in zigzag microchannelsElectrophoresis, 2007
- Microfluidic components and bio-reactors for miniaturized bio-chip applicationsBiotechnology and Bioprocess Engineering, 2004