Lignocellulosic Micro and Nanofibrillated Cellulose Produced by Steam Explosion for Wood Adhesive Formulations
Authors:
- Saad NaderSNSaad Nader
- Felipe GuzmanFGFelipe Guzman
- Raphael BecarRBRaphael Becar
- C閟ar SegoviaCSC閟ar Segovia
- Cecilia FuentealbaCFCecilia Fuentealba
- Miguel PeireraMPMiguel Peirera
- Evelyne MauretEMEvelyne Mauret
- Nicolas BrosseNicolas Brosse
Open Access
- 1 January 2022
- journal article
- research article
- Published by Tech Science Press in Journal of Renewable Materials
- Vol. 10 (2) , 263-271
Abstract
The reinforcing impact of Lignocellulosic micro and nanofibrillated cellulose (L-MNFCs) obtained from Eucalyptus Globulus bark in Urea-Formaldehyde UF adhesive was tested. L-MNFCs were prepared by an environmentally friendly, low-cost process using a combination process involving steam explosion followed by refining and ultra-fine grinding. Obtained L-MNFCs showed a web-like morphology with some aggregates and lignin nanodroplets. They present a mixture of residual fibers and fine elements with a width varying between 5 nm to 20 μm, respectively. The effects of the addition of low amounts of L-MNFCs (1% wt.) on the properties of three different adhesives (Urea-Formaldehyde UF, Phenol-Formaldehyde PF, and Tannin-Hexamine TH) were studied by the evolution of the pH, the viscosity, and the mechanical properties. Results showed that the viscosity of PF and UF adhesives increased with the addition of L-MNFCs, unlike TH. Meanwhile, the addition led to better mechanical behavior for the three adhesives. Particleboards were then prepared using modified UF with L-MNFCs and tested. Results showed that an amount of 1% wt. of L-MNFCs was sufficient to increase the internal bonding by ≈67%, the modulus of elasticity by ≈43%, and the modulus of rupture by ≈29%.Keywords
This publication has 19 references indexed in Scilit:
- Enhancement of mechanical strength of particleboard using environmentally friendly pine (Pinus pinaster L.) tannin adhesives with cellulose nanofibersAnnals of Forest Science, 2014
- Characteristics of banana fibers and banana fiber reinforced phenol formaldehyde composites‐macroscale to nanoscaleJournal of Applied Polymer Science, 2013
- Particle Board and Oriented Strand Board Prepared with Nanocellulose‐Reinforced AdhesiveJournal of Nanomaterials, 2012
- Extraction of nanocellulose fibrils from lignocellulosic fibres: A novel approachCarbohydrate Polymers, 2011
- Cellulose nanofibrils as filler for adhesives: effect on specific fracture energy of solid wood-adhesive bondsCellulose, 2011
- Nanocelluloses: A New Family of Nature‐Based MaterialsAngewandte Chemie International Edition, 2011
- Structure, morphology and thermal characteristics of banana nano fibers obtained by steam explosionBioresource Technology, 2011
- Microfibrillated cellulose and new nanocomposite materials: a reviewCellulose, 2010
- Cellulose nanofibrils—adsorption with poly(amideamine) epichlorohydrin studied by QCM-D and application as a paper strength additiveCellulose, 2007
- An environmentally friendly method for enzyme-assisted preparation of microfibrillated cellulose (MFC) nanofibersEuropean Polymer Journal, 2007