Exploring the Potential for Utilization of Medium and Highly Sulfidic Mine Tailings in Construction Materials: A Review
Authors:
- Natalia Pires MartinsNMNatalia Pires Martins
- Sumit SrivastavaSSSumit Srivastava
- Francisco Veiga SimãoFrancisco Veiga Simão
- He NiuHNHe Niu
- Priyadharshini PerumalPPPriyadharshini Perumal
- Ruben SnellingsRSRuben Snellings
- Mirja IllikainenMIMirja Illikainen
- Hilde ChambartHCHilde Chambart
- Guillaume HabertGHGuillaume Habert
Open Access
- 3 November 2021
- journal article
- review article
- Published by MDPI AG in Sustainability
- Vol. 13 (21) , 12150
Abstract
Medium and highly sulfidic tailings are high-volume wastes that can lead to severe environmental damage if not properly managed. Due to the high content of sulfide minerals, these tailings can undergo weathering if put in contact with oxygen and water, generating acid mine drainage (AMD). The moderate-to-high sulfide content is also an important technical limitation for their implementation in the production of construction materials. This paper reviews the use of sulfidic tailings as raw material in construction products, with a focus on cement, concrete, and ceramics. When used as aggregates in concrete, this can lead to concrete degradation by internal sulfate attack. In building ceramics, their implementation without prior treatment is undesirable due to the formation of black reduction core, efflorescence, SOx emissions, and their associated costs. Moreover, their intrinsic low reactivity represents a barrier for their use as supplementary cementitious materials (SCMs) and as precursors for alkali-activated materials (AAMs). Nevertheless, the production of calcium sulfoaluminate (CSA) cement can be a suitable path for the valorization of medium and highly sulfidic tailings. Otherwise difficult to upcycle, sulfidic tailings could be used in the clinker raw meal as an alternative raw material. Not only the SO3 and SiO2-rich bulk material is incorporated into reactive clinker phases, but also some minor constituents in the tailings may contribute to the production of such low-CO2 cements at lower temperatures. Nevertheless, this valorization route remains poorly explored and demands further research.Keywords
Funding Information
- Research Council of Finland (319676)
- European Commission (812580)
This publication has 158 references indexed in Scilit:
- Durability and leaching behavior of mine tailings-based geopolymer bricksConstruction and Building Materials, 2013
- Calcium and sulphur distribution in fired clay brick in the presence of a black reduction core using micro X-ray fluorescence mappingConstruction and Building Materials, 2011
- Manufacture of artificial aggregate using MSWI bottom ashWaste Management, 2011
- Investigations on mix design of tungsten mine waste geopolymeric binderConstruction and Building Materials, 2008
- Microstructural and geochemical evolution of paste tailings in surface disposal conditionsMinerals Engineering, 2008
- Effectiveness of various cover scenarios on the rate of sulfide oxidation of mine tailingsJournal of Hydrology, 2003
- Behaviour of polyaminophenolic additives in the granulation of lime and fly-ashWaste Management, 2000
- The potential use of geopolymeric materials to immobilise toxic metals: Part I. Theory and applicationsMinerals Engineering, 1997
- Cold-bond agglomeration of reactive pyrrhotite tailings for backfill using low cost binders: Gypsum β-hemihydrate and cementMinerals Engineering, 1995
- Environmental characterisation of the sulphidic tailings in LavrionMinerals Engineering, 1995