A Comparison of the Quench Analysis on an Impregnated Solenoid Magnet Wound on an Aluminum Mandrel Using Three Computer Codes
Authors:
- 1 June 2013
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 23 (3) , 4901005
Abstract
The magnet used for the quench protection comparison has an ID of 1.5 m. At a maximum current of ~ 210-A, the stored energy is ~13 MJ. The impregnated magnet coil is 281 mm long and about 105.6 mm thick. The coil is wound on a 6061-aluminum mandrel. The magnet quench protection system is passive. The magnet coil is subdivided with back-to-back diodes and resistors across each of the coil subdivision to reduce the magnet internal voltages. Conservative quench protection criteria were applied when the magnet was designed. These criteria are presented in this paper. Quench protection of the magnet was simulated using three computer codes from three different places. The results calculated using the three codes are compared to the original magnet quench protection criteria used to design the magnet. The three quench simulation codes assumptions are compared. The calculated hot-spot temperature and peak voltages are compared for the three quench simulation codes.Keywords
This publication has 13 references indexed in Scilit:
- Design and Analysis of the Quench Protection System for the MICE Coupling CoilsIEEE Transactions on Applied Superconductivity, 2012
- Coupled transient thermal and electromagnetic finite element analysis of quench in MICE coupling magnetCryogenics, 2012
- Quench Analysis of MICE Spectrometer Superconducting SolenoidIEEE Transactions on Applied Superconductivity, 2012
- The Role of Quench-Back in the Passive Quench Protection of Long Solenoids With Coil Sub-DivisionIEEE Transactions on Applied Superconductivity, 2010
- Over voltage in the multi-sectioned superconducting solenoid during quenchingPhysica C: Superconductivity and its Applications, 2009
- Quench Protection for the MICE Cooling Channel Coupling MagnetIEEE Transactions on Applied Superconductivity, 2009
- The Mechanical and Thermal Design for the MICE Coupling Solenoid MagnetIEEE Transactions on Applied Superconductivity, 2005
- Muon collidersAIP Conference Proceedings, 1996
- Quench back in thin superconducting solenoid magnetsCryogenics, 1984
- The measurement and theoretical calculation of quench velocities within large fully epoxy impregnated superconducting coilsIEEE Transactions on Magnetics, 1981