Effects of Bath Composition and Current Density on the Electrodeposition Behavior of Fe–Ni Invar Alloy
Authors:
Open Access
- 28 March 2023
- journal article
- research article
- Published by Springer Nature in Electronic Materials Letters
- Vol. 19 (6) , 503-509
Abstract
Fe–Ni invar alloy (Fe 64–Ni 36 wt%) has a very low coefficient of thermal expansion (CTE) than any other metals. For this reason, it has been used as fine metal mask (FMM) in RGB patterning of OLED manufacture process. However, as the resolution of OLED display is getting higher, the thickness of FMM is getting thinner and then the conventional extruded invar sheet cannot be used directly. The electrodeposition of invar can be the alternative for fabrication of thin FMM. In this study, the Fe–Ni alloy were electrodeposited varying bath compositions and current density. Also, the effects of ferric ion (Fe3+), produced during electrodeposition on inert anode, on the behavior of deposition were investigated. Finally, the Fe–Ni alloy with 36–40 wt% Ni were obtained at 50 mA/cm2 in 0.30 M Fe2+ bath. The back side and front side composition of the deposits were analyzed to evaluate the composition uniformity of the Fe–Ni alloys. Generally, the Fe content of back side of the deposits were higher than that of front side. Graphical AbstractKeywords
Funding Information
- National Research Foundation of Korea (2021R1F1A 1060048)
- Hongik University
This publication has 20 references indexed in Scilit:
- Influence of pH on the electrolytic deposition of Ni–Co filmsThin Solid Films, 2008
- Effects of electroplating variables on the composition and morphology of nickel–cobalt deposits plated through means of cyclic voltammetryElectrochimica Acta, 2002
- Non-Anomalous Codeposition of Iron-Nickel Alloys Using Pulse-Reverse Electroplating Through Means of Experimental StrategiesJournal of the Electrochemical Society, 2002
- Potentiostatic Deposition Model of Iron‐Nickel Alloys on the Rotating Disk Electrode in the Presence of Organic AdditiveJournal of the Electrochemical Society, 1997
- Hydrogen Desorption and Internal Stress in Nickel Coatings Obtained by Periodic ElectrodepositionJournal of the Electrochemical Society, 1992
- The Invar problemJournal of Magnetism and Magnetic Materials, 1991
- Pulsed Electrodeposition of Iron‐Nickel AlloysJournal of the Electrochemical Society, 1990
- A Mathematical Model for Anomalous Codeposition of Nickel‐Iron on a Rotating Disk ElectrodeJournal of the Electrochemical Society, 1989
- Electrodeposition of Nickel‐Iron Alloys: I . Effect of AgitationJournal of the Electrochemical Society, 1989
- Electrodeposition of binary magnetic alloysSurface Technology, 1982