Metasurface‐loaded circularly‐polarised slot antenna with high front‐to‐back ratio
Authors:
Open Access
- 1 August 2013
- journal article
- antennas and-propagation
- Published by Institution of Engineering and Technology (IET) in Electronics Letters
- Vol. 49 (16) , 979-981
Abstract
A new technique to achieve high front‐to‐back radiation ratios of slot antennas is presented. A 0.8 mm thin metasurface is loaded onto a circularly‐polarised slot antenna and backed by a metallic reflector at close distances. The antenna has an overall height of ∼ 0.1 wavelengths. However, it exhibits wideband characteristics with a measured impedance bandwidth (voltage standing‐wave ratio ≤ 2) of 73.3% and a 3 dB axial‐ratio bandwidth of 29.1%. A broadside gain of 7 dBic with a front‐to‐back ratio of 23.7 dB is achieved at 2.7 GHz.Keywords
This publication has 5 references indexed in Scilit:
- CPW-Fed Cavity-Backed Slot Radiator Loaded With an AMC ReflectorIEEE Transactions on Antennas and Propagation, 2011
- Single-feed circularly polarised aperture-coupled square ring slot microstrip antennaElectronics Letters, 2010
- Unidirectional Circularly-Polarized Slot Antennas With Broadband OperationIEEE Transactions on Antennas and Propagation, 2008
- Wideband Circularly Polarized Antenna With L-Shaped SlotIEEE Transactions on Antennas and Propagation, 2008
- Printed ring slot antenna for circular polarizationIEEE Transactions on Antennas and Propagation, 2002