A Novel Application of New High-Strength Plugging Agent in Baikouquan Oilfield
Open Access
- 15 August 2022
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 12 (16) , 8150
Abstract
The Baikouquan Oilfield is entering middle and later periods of development. Casing failure, caused by the quality of cementing and casing corrosion, affects the normal production of the well. The number of wells in this situation has been increasing in recent years. Some wells with a high aquifer have no way to achieve effective plugging. The conventional measures have short validity periods and low plugging strengths. They cannot meet the requirements of subsequent fracturing operations and long-term production. Therefore, a new type of plugging agent with high strength, temperature resistance, salt resistance and micro-expansion features was designed and developed. The field test was carried out on four wells in the Baikouquan block, including three wells with a strong water-flooded layer and one well with an upper casing leakage point. A field test showed that the leakage formation was successfully plugged under the condition that the oilfield pressure test value was 30 MPa, with a 100% success rate. The average fluid volume decreases by 51.4%, and the average oil volume increases by 270.8%. The average daily oil volume per well increases by 3.2 t/d. The new plugging agent has the characteristics of no regurgitation, fast cementing speed with the new interface, high cementing strength and construction safety. The above advantages are of great significance in reducing the operation cost of oil and water well production and enhancing oil recovery.Keywords
Funding Information
- Department of Education of Liaoning Province (LJKZ0420)
This publication has 26 references indexed in Scilit:
- Gas Adsorption Capacity of Wood PelletsEnergy & Fuels, 2016
- Evaluation of casing integrity defects considering wear and corrosion – Application to casing designJournal of Natural Gas Science and Engineering, 2016
- Geomechanical and Numerical Studies of Casing Damages in a Reservoir with Solid ProductionRock Mechanics and Rock Engineering, 2015
- A study on casing deformation failure during multi-stage hydraulic fracturing for the stimulated reservoir volume of horizontal shale wellsJournal of Natural Gas Science and Engineering, 2015
- Mechanical analysis and design of casing in directional well under in-situ stressesJournal of Natural Gas Science and Engineering, 2014
- A new method to predict the remaining life of corrosion casing for steam injection wellsMaterials and Corrosion, 2013
- Research and Application of Cement Plugging Techniques in Evaporite Bed of Piedmont Tectonic Belt of the Tarim BasinAdvanced Materials Research, 2013
- Analysis of volume expansion data for periclase, lime, corundum and spinel at high temperaturesBulletin of Materials Science, 2012
- The synthesis and characterization of an expansive admixture for M-type cements I. The influence of free CaO to the formation of ettringiteJournal of Thermal Analysis and Calorimetry, 2012
- Law and countermeasures for the casing damage of oil production wells and water injection wells in Tarim OilfieldPetroleum Exploration and Development, 2011