Some Observations on Yield Surfaces for 304 Stainless Steel at Large Prestrain
Authors:
- 1 September 1995
- journal article
- Published by Wiley in Journal of Applied Mechanics
- Vol. 62 (3) , 626-632
Abstract
Experiments to study the yield surface of 304 stainless steel with either 20 percent tension or 20 percent shear prestrain have been conducted. Explicit transformation equations have also been derived to convert the experimentally determined first Piola-Kirchhoff stress components into the Cauchy stresses and the second Piola-Kirchhoff stresses for combined axial-torsional experiments. It has been found that, in the phenomenological approach, the stress measure and the definition of yield have significant effect on the degree of anisotropy of strain-hardening. In particular, the strain-hardening rule is extremely complicated if the second Piola-Kirchhoff stress is used. Also, the equivalent stress-strain curves have been investigated by means of different stress measures.Keywords
This publication has 15 references indexed in Scilit:
- An Experimental Investigation of the Yield Loci of 1100-0 Aluminum, 70:30 Brass, and an Overaged 2024 Aluminum Alloy After Various PrestrainsJournal of Engineering Materials and Technology, 1986
- An Experimental Investigation of Yield Surfaces and Loading Surfaces of Pure Aluminum With Stress-Controlled and Strain-Controlled Paths of LoadingJournal of Engineering Materials and Technology, 1984
- The finite strain tension torsion test of a thin-walled tube of elastic-plastic materialInternational Journal of Solids and Structures, 1982
- The Subsequent Yield Surfaces after Preloading under Combined Axial Load and TorsionBulletin of JSME, 1976
- An Analytical Study of an Experimentally Verified Hardening LawJournal of Applied Mechanics, 1975
- On the effect of biaxial cyclic loading on the yield surface of M-63 brassActa Mechanica, 1975
- On the Foundations of Thermoplasticity—An Experimental InvestigationJournal of Applied Mechanics, 1973
- The effect of loading path on the yield surface at elevated temperaturesInternational Journal of Solids and Structures, 1972
- Effect of Pre-Strain on Yield Surfaces in CopperJournal of Mechanical Engineering Science, 1964
- Plastic Stress–Strain Relations and Yield Surfaces for Aluminium AlloysJournal of Mechanical Engineering Science, 1961