Integration of 175-MHz LIPAc RF System and RFQ Linac for Beam Commissioning
- 21 April 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 48 (6) , 1489-1495
Abstract
The eight-chain RF system and radio frequency quadrupole (RFQ) linac were successfully integrated at the facility of the Linear IFMIF Prototype Accelerator (LIPAc). We achieved an unprecedented high current deuteron beam up to 55 mA in pulse operation (300 μs, 1 Hz). The keys of the success were (1) understanding reflected power from RFQ to RF system, (2) tuning each RF chain individually, (3) intensive RF conditioning for holding the stable RF power in the RFQ, and (4) optimizing the beam loading compensation control. Interestingly, the reflection at the breakdown in RF conditioning was higher than an estimation and reached up to 600 kW so far. In order to avoid damage on tetrodes by the high reflection, the impedance of each circulator was accurately adjusted.Keywords
This publication has 12 references indexed in Scilit:
- Status of the RFQ linac installation and conditioning of the Linear IFMIF Prototype AcceleratorNuclear Materials and Energy, 2018
- Linear IFMIF Prototype Accelerator (LIPAc): Installation activities for Phase-B beam commissioning in RokkashoNuclear Materials and Energy, 2018
- Fully Digital and White Rabbit-Synchronized Low-Level RF System for LIPAcIEEE Transactions on Nuclear Science, 2017
- IFMIF, the European–Japanese efforts under the Broader Approach agreement towards a Li(d,xn) neutron source: Current status and future optionsNuclear Materials and Energy, 2016
- Materials research for fusionNature Physics, 2016
- Installation and first operation of the International Fusion Materials Irradiation Facility injector at the Rokkasho siteReview of Scientific Instruments, 2015
- The accomplishment of the Engineering Design Activities of IFMIF/EVEDA: The European–Japanese project towards a Li(d,xn) fusion relevant neutron sourceNuclear Fusion, 2015
- Progress in IFMIF Engineering Validation and Engineering Design ActivitiesFusion Engineering and Design, 2013
- Main baseline of IFMIF/EVEDA projectFusion Engineering and Design, 2009
- RF Linear Accelerators2008