Heavy Truck Drag Reduction Obtained from Devices Installed on the Trailer
Authors:
- 29 September 2015
- journal article
- Published by SAE International in SAE International Journal of Commercial Vehicles
- Vol. 08 (2) , 747-760
Abstract
The flow-field around a “common” European heavy truck, equipped with several different trailer devices, is investigated using steady and unsteady simulations.This work demonstrates how with simple devices added on the trailer it is possible to strongly decrease the aerodynamic drag over 10%, with an increase of overall dimensions below 1% without any change to the load capacity of the trailer.Several devices, installed on the trailer, are tested on a target vehicle and the shape of the “airbag”, the “fin”, the “boat tail” and the “front-rear trailer device” has been optimized to achieve the maximum in drag reduction in front wind. The performance of the optimized devices are tested also in cross wind conditions with the yaw angle varying from 0° to 30°.The truck equipped with the front-rear trailer device is also investigated using time variant simulation with yaw angle of 0°, 5°, 10°.Detached eddy simulation (DES) with one equation Spalart-Allmaras as turbulence model is used to perform the analysis of the unsteady flow; the two equation k-ω SST turbulence model is selected for the steady-state RANS simulations. The unsteady simulations are performed using computational meshes on the order of 40 million of elements while RANS simulation are done with mesh of 10 million of elements.The analysis is performed in the open-source CFD framework OpenFOAM®.Keywords
This publication has 21 references indexed in Scilit:
- Numerical and Experimental Investigation on Vehicles in PlatoonSAE International Journal of Commercial Vehicles, 2012
- Summary of Full-Scale Wind Tunnel Tests of Aerodynamic Drag-Reducing Devices for Tractor-Trailers2009
- On-Road Evaluation of Devices to Reduce Heavy Truck Aerodynamic DragSAE International Journal of Advances and Current Practices in Mobility, 2007
- DOE's Effort to Reduce Truck Aerodynamic Drag - Joint Experiments and Computations Lead to Smart Design2004
- Truck Aerodynamics Reborn - Lessons from the PastSAE International Journal of Advances and Current Practices in Mobility, 2003
- Comparison of road and wind-tunnel drag reductions for commercial vehiclesJournal of Wind Engineering and Industrial Aerodynamics, 1993
- Heavy Duty Truck AerodynamicsSAE International Journal of Advances and Current Practices in Mobility, 1987
- A Review of Commercial Vehicle Aerodynamic Drag Reduction TechniquesProceedings of the Institution of Mechanical Engineers, Part D: Transport Engineering, 1985
- Development of container-mounted devices for reducing the aerodynamic drag of commercial vehiclesJournal of Wind Engineering and Industrial Aerodynamics, 1981
- Necessity and Premises for Reducing the Aerodynamic Drag of Future Passenger CarsSAE International Journal of Advances and Current Practices in Mobility, 1981