Modeling of the Thermomechanical Fatigue of 63Sn-37Pb Alloy
Authors:
- 1 January 1993
- book chapter
- Published by ASTM International
- p. 91-105
Abstract
The stress-strain hysteresis behavior of 63Sn-37Pb solder joints in thermomechanical cycling was determined experimentally with a bimetallic loading frame for temperature excursions between — 30 and 130°C applied in triangular waveform for periods of 12, 24, 48, and 300 min. A computer simulation based on a constitutive equation previously formulated for steady-state creep conditions yielded reasonable agreement between the predicted and measured hysteresis behavior. An approximately linear relationship was found between the drop in maximum load in a hysteresis cycle and the measured fatigue cracked area.Keywords
This publication has 10 references indexed in Scilit:
- Integrated Matrix Creep: Application to Accelerated Testing and Lifetime Prediction1991
- A Damage Integral Methodology for Thermal and Mechanical Fatigue of Solder Joints1991
- A damage integral approach to thermal fatigue of solder jointsIEEE Transactions on Components, Hybrids, and Manufacturing Technology, 1989
- Accelerated Thermal Fatigue Cycling of Surface Mounted PWB Assemblies in Telecom EquipmentCircuit World, 1988
- Effects of R-ratio and wave form on the fatigue of 63Sn-37Pb solder used in electronic packaging1988
- Fatigue of Solder Joints in Surface Mount Devices1988
- Creep and Stress Relaxation in Solder Joints of Surface-Mounted Chip CarriersIEEE Transactions on Components, Hybrids, and Manufacturing Technology, 1987
- Forces, Moments, and Displacements During Thermal Chamber Cycling of Leadless Ceramic Chip Carriers Soldered to Printed BoardsIEEE Transactions on Components, Hybrids, and Manufacturing Technology, 1984
- Deformation of PbSn eutectic alloys at relatively high strain ratesActa Metallurgica, 1979
- Creep behaviour in the superplastic Pb–62% Sn eutecticPhilosophical Magazine, 1975