Friction Forces Within the Cylinder Bores of Swash-Plate Type Axial-Piston Pumps and Motors
Author:
- 1 September 1999
- journal article
- Published by ASME International in Journal of Dynamic Systems, Measurement, and Control
- Vol. 121 (3) , 531-537
Abstract
In this research, the friction within the cylinder bore of a swash-plate type axial-piston machine is examined. Unlike previous research, this work develops a mathematical model for the friction based upon lubricating conditions which are described by the well-known Stribeck curve. Furthermore, a test device is built for measuring the frictional characteristics during low pressure and low speed operation and these results are compared with the mathematical model. For high pressure and high speed considerations, a numerical investigation based upon the model is conducted and it is shown that the friction associated with a pumping piston is greater than the friction associated with a motoring piston. It is also shown that increased piston speeds usually reduce the friction within the cylinder bore; however, a “cross-over” condition may exist where the increased speed will actually increase the friction as a result of increased fluid shear. Furthermore, it is shown that speed changes have a more significant impact on motoring pistons as opposed to pumping pistons due to a difference in the location of hydrodynamic lubrication within the cylinder bore. It is noted that this difference exits due to the bore geometry and the direction of piston travel.Keywords
This publication has 5 references indexed in Scilit:
- Application of a Mixed Lubrication Model for Hydrostatic Thrust Bearings of Hydraulic EquipmentJournal of Tribology, 1993
- Piston Rotation and Frictional Forces between Piston and Cylinder of Piston Pump and Motor.TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C, 1993
- The Study of Hydrostatic Lubrication of the Slipper in a High-Pressure Plunger PumpTribology Transactions, 1993
- Slipper Balance in Axial Piston Pumps and MotorsJournal of Tribology, 1992
- Tribology: friction and wear of engineering materialsMaterials & Design (1980-2015), 1992