Microstructure‐property relationships in a tissue‐engineering scaffold
- 28 February 2007
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 104 (5) , 2919-2927
Abstract
Electrospinning can produce tissue‐engineering scaffolds possessing appropriate strength, biomimetic structure, economic appeal, and biocompatibility. To investigate how microstructural changes could potentially affect adherent mammalian cells, tensile samples were strained to 10, 40, and 80% extension, and adhered to double‐sided carbon tape to maintain specific states of strain. While establishing the stress–strain response, we invoked polymer sintering to help verify that the “point bonding” concept is more significant than previously realized at both the macroscopic and microscopic length scales. Sintering successfully established the effects of deliberate, extensive point bonding/localized “notch” generation on mechanical properties and microstructural response without requiring chemical changes within the structure. We also found that fibers experience significant hysteresis in terms of their orientation following exposure to high values of strain. Aligned fibers provide higher strengths (σave = 2.8 ± 0.3 MPa vs. σave = 1.29 ± 0.04 MPa for unaligned fibers) but considerably lower elongation [εave = (30 ± 2)% vs. εave = (102 ± 6)%]. Conversely, when strain occurs perpendicular to the aligned fiber direction total strain increases [εave = (188 ± 6)%] while strength decreases (σave = 0.38 ± 0.01 MPa). Elastic response to low strains appears to estimate ultimate tensile strength. In many ways, electrospun fibers behave similarly to classic interpretations of polymer chains in that when strained in both cases elements can rearrange and translate to align along the direction of loading. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007Keywords
This publication has 31 references indexed in Scilit:
- Modulation of anisotropy in electrospun tissue-engineering scaffolds: Analysis of fiber alignment by the fast Fourier transformBiomaterials, 2006
- Preparation and anisotropic mechanical behavior of highly‐oriented electrospun poly(butylene terephthalate) fibersJournal of Applied Polymer Science, 2006
- Thermal interfiber bonding of electrospun poly(l-lactic acid) nanofibersMaterials Letters, 2006
- Deformation behavior of electrospun poly(L‐lactide‐co‐ε‐caprolactone) nonwoven membranes under uniaxial tensile loadingJournal of Polymer Science Part B: Polymer Physics, 2005
- Guided bone regeneration membrane made of polycaprolactone/calcium carbonate composite nano-fibersBiomaterials, 2005
- Preparation and properties of electrospun poly(vinylidene fluoride) membranesJournal of Applied Polymer Science, 2005
- Enzymatic Degradation of Poly(L‐lactide) and Poly(ε‐caprolactone) Electrospun FibersMacromolecular Bioscience, 2004
- Water absorption and mechanical properties of electrospun structured hydrogelsJournal of Applied Polymer Science, 2004
- Mechanical behavior of electrospun polyurethanePolymer, 2003
- Characterization of nano-structured poly(ε-caprolactone) nonwoven mats via electrospinningPolymer, 2003