Comparison of the theoretical temperature dependence of power leakage with experiments on LST-cut quartz
Authors:
- C.S. LamCLC.S. Lam
- D.E. HoltDHD.E. Holt
- 4 December 2002
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 497-500
Abstract
The theoretical temperature dependence of the center frequency and insertion loss of SAW (surface acoustic wave) filters on the LST-cut of quartz is compared with experimental results. Theoretical values including metallization effect are in good agreement with experiments. The temperature dependence of the center frequency on the LST-cut filters is greatly affected by both the cut-angle and the aluminium thickness of the interdigital transducer. The temperature dependence of insertion loss is mainly affected by the cut-angle. It is found by theoretical calculation that there is a combination of cut-angle and an aluminium thickness which exhibits both the minimum temperature frequency shift and change of insertion loss.<>Keywords
This publication has 6 references indexed in Scilit:
- The temperature dependency of power leakage in LST-cut quartz surface acoustic wave filters2003
- A comparison of temperature performance of SAW filters made on ST- and LST-cut quartz2003
- High stable SAW devices on LST cut of quartzElectronics and Communications in Japan (Part II: Electronics), 1988
- Low Loss, Highly Stable SAW Devices on Quartz1986
- A New Cut of Quartz with Extremely Small Temperature Coefficient by Leaky Surface Wave1985
- The Variation of the Elastic Constants of Crystalline Aluminum with Temperature between 63°K and 773°KPhysical Review B, 1953