Application and Verification of Voltage Angle-Based Fault Diagnosis Method in Six-Phase IPMSM
- 19 October 2023
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. PP (00939994) , 1-12
Abstract
Static eccentricity fault (SEF) is mainly caused by incorrect fabrication of the motor and external mechanical stress from the outside, while permanent magnet irreversible demagnetization fault (IDF) is mainly caused by an increase in the temperature of the motor when instantaneous overcurrent is applied. These faults are generally diagnosed through a vibration sensor and an additional hardware device. However, the hardware for vibration measurement is expensive, and the reliability of the vibration sensor is also low due to the influence of electrical noise generated by the high switching frequency of the inverter. Therefore, in order to solve this problem, this paper proposes a fault diagnosis method for a six-phase interior permanent magnet synchronous motor (IPMSM) using the voltage angle calculated by the inverter in real-time without additional hardware configuration. First, an analysis of voltage angle and electrical parameter changes due to fault is performed using the finite element method (FEM). Next, fault diagnosis using the proposed voltage angle is verified through experiment. Finally, we compare the fault diagnosis accuracy of the multivariate regression analysis (MRA) model and the artificial neural network (ANN) model using the voltage angle.Keywords
Funding Information
- Industrial Strategic Technology Development Program of Korea Evaluation Institute of Industrial Technology (20018442, 20023790)
This publication has 27 references indexed in Scilit:
- A Novel Asymmetric and Unconventional Stator Winding Configuration and Placement for a Dual Three-Phase Surface PM MotorIEEE Transactions on Magnetics, 2017
- Analysis of Dynamic Unbalanced Magnetic Pull in Induction Motor With Dynamic Eccentricity During Starting PeriodIEEE Transactions on Magnetics, 2016
- Detection of Inter-Turn and Dynamic Eccentricity Faults Using Stator Current Frequency Pattern in IPM-Type BLDC MotorsIEEE Transactions on Industrial Electronics, 2015
- Motor Bearing Fault Diagnosis Using Trace Ratio Linear Discriminant AnalysisIEEE Transactions on Industrial Electronics, 2013
- Decoupled Vector Control Scheme for Dual Three-Phase Permanent Magnet Synchronous MachinesIEEE Transactions on Industrial Electronics, 2013
- Advanced Eccentricity Fault Recognition in Permanent Magnet Synchronous Motors Using Stator Current Signature AnalysisIEEE Transactions on Industrial Electronics, 2013
- Decoupled $d$–$q$ Model of Double-Star Interior-Permanent-Magnet Synchronous MachinesIEEE Transactions on Industrial Electronics, 2012
- Static-, Dynamic-, and Mixed-Eccentricity Fault Diagnoses in Permanent-Magnet Synchronous MotorsIEEE Transactions on Industrial Electronics, 2009
- Analysis of Double-Star Permanent-Magnet Synchronous Generators by a General Decoupled $d$–$q$ ModelIEEE Transactions on Industry Applications, 2009
- Motor bearing damage detection using stator current monitoringIEEE Transactions on Industry Applications, 1995