A cost-effective catalytically adsorbent for in situ remediation of manganese contaminated groundwater
Authors:
- 28 June 2017
- journal article
- research article
- Published by IWA Publishing in Water Supply
- Vol. 18 (2) , 504-514
Abstract
Manganese oxide coated scoria (MOCS) was prepared as a cost-effective catalytically adsorbent with high permeability to remediate manganese contaminated groundwater. Scanning electron microscope visual expressed that on the relatively smooth surface of raw scoria (RS) a large amount of micro pores and dense bulk-like structures after modification and filtration appeared. The data from Fourier transform infrared showed that the intrinsic scoria structure was unchanged during modification. The X-ray diffraction and X-ray photoelectron spectroscopy instrumental studies revealed that the newborn manganese oxide layer was a mixed-valence of manganese (Mn3+ and Mn4+) which could absorb the Mn2+ and catalytically facilitate oxidation with oxygen. Subsequently, the adsorption capacity of RS and MOCS was demonstrated in adsorption experiments. The kinetics of manganese adsorption by RS and MOCS followed pseudo second order with the correlation coefficients of 0.983 and 0.989, respectively. The experimental data were better fitted to Langmuir isotherm than Freundlich isotherm, indicating that the monolayer adsorption process for manganese was acting on the surface of RS and MOCS. The filtration experiment showed high Mn2+ removal efficiency by MOCS in a wide range of hydraulic retention time (15–40 min) in 40 days, which demonstrated that the MOCS is a good potential application prospect for manganese removal from groundwater.Keywords
This publication has 26 references indexed in Scilit:
- Study on the factors affecting simultaneous removal of ammonia and manganese by pilot-scale biological aerated filter (BAF) for drinking water pre-treatmentBioresource Technology, 2013
- The removal of copper in water using manganese activated saturated and unsaturated sand filtersChemical Engineering Journal, 2012
- Manganese-modified natural sand in the remediation of aquatic environment contaminated with heavy metal toxic ionsChemical Engineering Journal, 2011
- Removal of Mn2+ from aqueous solution by manganese oxide coated zeoliteMinerals Engineering, 2010
- Removal of divalent heavy metals (Cd, Cu, Pb, and Zn) and arsenic(III) from aqueous solutions using scoria: Kinetics and equilibria of sorptionJournal of Hazardous Materials, 2009
- Iron and manganese removal by using manganese ore constructed wetlands in the reclamation of steel wastewaterJournal of Hazardous Materials, 2009
- Biological manganese removal from potable water using trickling filtersBiochemical Engineering Journal, 2008
- Removal of copper(II) and lead(II) from aqueous solution by manganese oxide coated sandJournal of Hazardous Materials, 2006
- Removal of copper(II) and lead(II) from aqueous solution by manganese oxide coated sandJournal of Hazardous Materials, 2006
- Biological treatment of Mn(II) and Fe(II) containing groundwater: kinetic considerations and product characterizationWater Research, 2004