Design and analysis of biomimetics based excavator bucket and tooth
- 20 November 2021
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
- Vol. 236 (3) , 1167-1175
Abstract
Within the scope of this paper, various bucket tooth designs and a biomimetic bucket design were created in order to produce a solution on digging efficiency which is one of the general problems of construction machines. These designs were inspired by giant anteater and American badger front claws. The inspiration aspect was diversified by integrating the paw and claw curves of the giant anteater and by bringing American badger claws into the design in different ways. Furhermore, the designed biomimetic bucket alternatives were compared between each other and the standard bucket equipment used in the market by making a computer aided static analysis. The compared criteria were the equivalent stress and total deformation formed on the bucket itself, the excavation equipment and the excavated soil. According to the analysis results, when the bucket tooth named P2 is mounted to the standard bucket, it has 42% lower Von-Mises stress on than standard bucket tooth. Additionally, it is exposed 4,7% less total deformation than standard tooth. Also, in terms of maximum Von-Mises stress formed on the soil model, P2 causes 17,5% greater stress than the standard bucket tooth.Keywords
This publication has 13 references indexed in Scilit:
- Design and tests of biomimetic blades for soil-rototilling and stubble-breakingJournal of Bionic Engineering, 2015
- Numerical analysis of stresses in mine excavator bucketJournal of Mining Science, 2015
- Structural Bionic Design for Digging Shovel of Cassava Harvester Considering Soil MechanicsApplied Bionics and Biomechanics, 2014
- Effect of stacking sequence on the erosive wear behavior of jute and juteglass fabric reinforced epoxy compositeInternational Journal of Engineering, Science and Technology, 2011
- CRABOT: A Biomimetic Burrowing Robot Designed for Underground Chemical Source LocationAdvanced Robotics, 2011
- Wood Wasp Inspired Planetary and Earth Drill2010
- Effects of biomimetic surface designs on furrow opener performanceJournal of Bionic Engineering, 2009
- Extraterrestrial Drilling and Excavation2009
- Bionic optimization research of soil cultivating component designScience China Technological Sciences, 2008
- Methodology for product design based on the study of bionicsMaterials & Design (1980-2015), 2005