Design of a Flexible Passive Adaptive Suction Module for Wall-Climbing Robots
- 15 October 2025
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 10 (12) , 12429-12436
Abstract
As the demand for three-dimensional operations grows, wall-climbing robots must traverse complex curved surfaces featuring discontinuous curvatures and abrupt transitions between planes, cylinders, and spheres. Traditional rigid structures often fail to maintain stable, conformal adhesion under such conditions. This paper introduces a flexible, passively adaptive suction module that achieves surface conformity through multi-DOF compliant joints and spherical hinges, eliminating the need for active control. The module is implemented in a bipedal wall-climbing robot for experimental validation. Tests on flat, cylindrical (radius: 1.07 m), and spherical (radius: 0.35 m) surfaces demonstrate a 95% adhesion success rate on flat and cylindrical surfaces and 75% on spherical surfaces, with less than 6% adhesion force loss and a 36% increase in response time, providing a practical solution for robots operating on curved surfaces.Keywords
Funding Information
- National Natural Science Foundation of China (52175556)
- Technology Development Fund (0004/2022/AKP, 0102/2022/A2, 0078/2023/RIB3)
- Universidade de Macau (MYRG-CRG2022-00004-FST-ICI, MYRG-GRG2024-00222-FST-UMDF)
This publication has 28 references indexed in Scilit:
- A highly adaptable soft pipeline robot for climbing outside millimeter-sized pipelinesNano Energy, 2024
- Intelligent Rock‐Climbing Robot Capable of Multimodal Locomotion and Hybrid Bioinspired AttachmentAdvanced Science, 2024
- Design and analysis of a negative pressure wall-climbing robot with an omnidirectional characteristic for cylindrical wallRobotica, 2024
- Design and analysis of a passive adaptive wall-climbing robot based on five-bar mechanismsOcean Engineering, 2024
- Design and analysis of a wall-climbing robot with passive compliant mechanisms to adapt variable curvatures wallsRobotica, 2024
- Design and development of a glass façade cleaning robotMechanism and Machine Theory, 2022
- A Four-legged Wall-climbing Robot with Spines and Miniature Setae Array Inspired by Longicorn and GeckoJournal of Bionic Engineering, 2021
- Development of a wall-climbing platform with modularized wall-cleaning unitsAutomation in Construction, 2017
- OmniClimbers: Omni-directional magnetic wheeled climbing robots for inspection of ferromagnetic structuresRobotics and Autonomous Systems, 2013
- 3DCLIMBER: Climbing and manipulation over 3D structuresMechatronics, 2011