Flexural behaviour analysis of wet joint of precast bridge deck with UHPC functional gradient
Authors:
- 22 September 2022
- journal article
- research article
- Published by SAGE Publications in Advances in Structural Engineering
- Vol. 26 (3) , 448-458
Abstract
To optimize the wet joint structure of a precast bridge deck and make effective use of ultrahigh-performance concrete (UHPC), five specimens of the prefabricated UHPC functional gradient wet joint plate (UFGWJP) and one normal concrete prefabricated wet joint plate were tested by four-point bending, and their failure modes, bearing capacity, deformation performance, and strain distribution were analysed. The results show that the failure mode of all joint plates was bending failure, and the initial cracking position was basically at the interface between the joint and the precast slab. The excellent mechanical properties of UHPC enhance the bonding performance between the joint and the precast plate interface and significantly improve the cracking load. With an increase in the thickness ratio of UHPC and the flexural toughness ratio of UHPC/normal concrete (NC), the bearing capacity and deformation performance of the joint plate gradually increase. Furthermore, the wet joint of a prefabricated bridge deck with a functional gradient can be designed and fabricated, and the structural optimization of the prefabricated bridge deck wet joints is proven successful by tests.Keywords
Funding Information
- National Natural Science Foundation of China (51478183)
- Key R&D of Jiangxi Province (2019BBG70079)
- Natural Science Foundation of Jiangxi Province (2019BAB206042)
This publication has 17 references indexed in Scilit:
- Laboratory Evaluation of Ultrahigh-Performance Concrete Shear Key for Prestressed Adjacent Precast Concrete Box Girder BridgesJournal of Bridge Engineering, 2017
- Microstructural and mechanical performance of underwater wet welded S355 steelJournal of Materials Processing Technology, 2016
- Laboratory Testing of GFRP-RC Panels with UHPFRC Joints of the Nipigon River Cable-Stayed Bridge in Northwest Ontario, CanadaJournal of Bridge Engineering, 2016
- A review on ultra high performance concrete: Part I. Raw materials and mixture designConstruction and Building Materials, 2015
- Simulation of flexural performance of layered ECC-concrete composite beam with fracture mechanics modelEngineering Fracture Mechanics, 2014
- Influence of the porosity gradient in cement paste matrix on the mechanical behavior of mortarCement and Concrete Research, 2010
- Experimental investigation and analysis on flexural performance of functionally graded composite beam crack-controlled by ultrahigh toughness cementitious compositesScience China Technological Sciences, 2009
- Durability of an Ultrahigh-Performance ConcreteJournal of Materials in Civil Engineering, 2007
- Alternate Substructure Systems for Standard Highway BridgesJournal of Bridge Engineering, 2001
- Improving Standard Bridges with Attention to Cast-in-Place SubstructureJournal of Bridge Engineering, 2000