ALKALI-INDUCED AGGLOMERATION OF SOLID PARTICLES IN COAL COMBUSTORS AND GASIFIERS
Authors:
- 1 July 1989
- journal article
- research article
- Published by Taylor & Francis in Chemical Engineering Communications
- Vol. 81 (1) , 83-96
Abstract
The effect of alkali adsorption on the agglomeration of particles of bauxite, kaolinite, emathlite, lime and two types of coal ash is studied. An agglomeration (adhesion) temperature is defined which characterizes the adhesion propensity of particles. An experimental technique is developed to measure this agglomeration point in situ and without sample quenching or removal. The effect of alkali adsorption on the agglomeration characteristics of the substrates is determined. The agglomeration temperature for all substrates decreases a:, alkali content increases. At low loadings the alkali adsorption enhances particle agglomeration by forming new compounds of lower melting points. At high concentrations, the agglomeration point of all substrates approaches the melting point of condensing alkali. Under these conditions, adhesion and agglomeration are caused by a layer of molten alkali which covers the exterior of the particles.Keywords
This publication has 6 references indexed in Scilit:
- Investigation of the structural forms of potassium in coke by electron microscopy and X-ray absorption spectroscopyFuel, 1986
- Agglomeration of coal ash in fluidized bedsFuel, 1983
- Investigation of the high-temperature behaviour of coal ash in reducing and oxidizing atmospheresFuel, 1981
- Technique to measure the temperature of agglomeration of coal ashFuel, 1980
- Mineral matter in coal and the thermal performance of large boilersProgress in Energy and Combustion Science, 1979
- The Physical Transformation of the Mineral Matter in Pulverized Coal Under Simulated Combustion ConditionsCombustion Science and Technology, 1977