Soft Denture Liner Adhesion to Conventional and CAD/CAM Processed Poly(Methyl Methacrylate) Acrylic Denture Resins-An In-Vitro Study
Open Access
Abstract
This study aimed to evaluate the airborne-particle abrasion surface treatment effects on the tensile bond strength (TBS) between resilient denture liner and CAD/CAM or conventional heat polymerized poly (methyl methacrylate) (PMMA) acrylic denture resins. A total of 48 dumbbell-shaped specimens (70 mm in total length, and 12 mm and 7 mm in diameter at the thickest and thinnest section, respectively) were prepared from CAD/CAM and conventional acrylic resins. Before relining with denture liner, 12 specimens from each material were surface-treated by 110 µm Al2O3 airborne-particle abrasion, and the remaining specimens served as control (no treatment). Following relining, all the specimens were aged by thermal cycling (1000 cycles, 5–55 °C). The TBS of denture liner to acrylic denture resins was tested in a universal testing apparatus at a 5 mm/min crosshead speed. The debonded surfaces were visually examined for the failure modes. ANOVA and multiple comparisons posthoc analysis tests were applied to determine the significant difference in TBS between the study groups (α = 0.05). A significant difference in TBS was observed between the control and surface treated groups (p < 0.001) for both acrylic resins materials. However, there was no statistically significant difference in bond strength between the acrylic resins materials (p = 0.739). Surface treatment with airborne-particle abrasion demonstrated increased TBS of the soft denture liners to acrylic resins. The TBS of conventional and CAD/CAM acrylic resins to soft denture liners were not considerably different.Keywords
This publication has 39 references indexed in Scilit:
- Biofilm formation on denture liners in a randomised controlled in situ trialJournal of Dentistry, 2013
- Tensile bond strength of silicone-based soft denture liner to two chemically different denture base resins after various surface treatmentsLasers in Medical Science, 2012
- The effect of denture base surface pretreatments on bond strengths of two long term resilient linersThe Journal of Advanced Prosthodontics, 2011
- Effect of different surface treatments on tensile bond strength of silicone-based soft denture linerLasers in Medical Science, 2010
- Effects of Different Denture Cleansers on the Tensile Bond Strength of Denture LinersThe Journal of Adhesion, 2009
- Effects of Thermocycling on the Tensile Bond Strength of Three Permanent Soft Denture LinersJournal of Prosthodontics, 2008
- Evaluation of bond strength of soft relining materials to denture base polymersDental Materials, 2007
- Effect of thermocycling on the tensile and shear bond strengths of three soft liners to a denture base resinJournal of Applied Oral Science, 2007
- Bond strength of a silicone lining material to alumina‐abraded and lased denture resinJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2004
- Effect of test method on the bond strength of a silicone resilient denture lining materialThe Journal of Prosthetic Dentistry, 1996