Experimental Investigation of Progressive Damage and the Effect of Layup in Notched Tensile Tests
- 1 January 2006
- journal article
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 40 (2) , 119-141
Abstract
The presence of subcritical damage in notched composites significantly affects the ultimate failure mode and strength. This article presents a detailed study of four different layups of E-glass/913 tested using a double-edge-notched specimen loaded in tension. For each layup three different in-plane dimensions are tested. Results are presented in terms of failure mode, strength, and subcritical damage development. Subcritical damage development is consistent between the layups and between scaled specimens of a single layup. Ultimate failure, however, shows some variations both with layup and size and this is examined in some detail. The trend of decreasing strength with increasing specimen size is observed for all cases except those where there is a change in failure mode between different size tests. The strengths are compared with predictions from two analytical techniques, which show some ability to achieve correlation across a subset of the test data. Correlation is not possible where variations in failure mode occur for a single layup.Keywords
This publication has 18 references indexed in Scilit:
- Use Experience With a Developmental General Purpose Non-Contacting Extensometer With High Resolution2001
- A Progressive Damage Methodology for Residual Strength Predictions of Notched Composite PanelsJournal of Composite Materials, 1999
- Size effects in the testing of fibre-composite materialsComposites Science and Technology, 1999
- Reduction in tensile and flexural strength of unidirectional glass fibre-epoxy with increasing specimen sizeComposite Structures, 1997
- Fracture Criterion for Notched Thin Composite LaminatesAIAA Journal, 1997
- Damage tolerance of open-hole CFRP laminates loaded in compressionComposites Engineering, 1994
- Failure of Quasi-Isotropic Composite Laminates with Free EdgesJournal of Reinforced Plastics and Composites, 1988
- Notch Sensitivity and Stacking Sequence of Laminated Composites1986
- Uniaxial Failure of Composite Laminates Containing Stress Concentrations1975
- Stress Fracture Criteria for Laminated Composites Containing Stress ConcentrationsJournal of Composite Materials, 1974