Laboratory experiments on shear failure of snow
Author:
Open Access
- 1 January 1998
- journal article
- research article
- Published by International Glaciological Society in Annals of Glaciology
- Vol. 26, 97-102
Abstract
Using a direct simple-shear apparatus, snow samples (115 mm in diameter, 16–18 mm in height) taken from a so-called homogeneous layer (small rounded particles, density: 290 kg m−3) were tested in a cold laboratory. Experiments were performed for strain rates between 7 × 10−6 s−1 and 5 × 10−3 s−1 at test temperatures of −5°C, −10°C and −15°C. The effects of strain rate and temperature on failure stress, failure strain, stiffness (initial tangent modulus) and toughness were studied. The transition between the ductile and brittle (sudden fracture) state of failure was found to be at about 1 × 10−3 s−1 for the snow types tested, independent of temperature. Stiffness proved to be the most temperature-dependent property of alpine snow. It strongly increases with decreasing temperature. Failure strain and toughness decrease with decreasing temperature. Failure stress was found to increase slightly with decreasing temperature. The effect is not very distinct but close to statistically significant and might be partly hidden by the scatter in the stress data due to variations inherent in sampling and testing.Keywords
This publication has 6 references indexed in Scilit:
- Effects of temperature on fracture in dry slab avalanche releaseJournal of Geophysical Research, 1996
- Variability and frontogenesis in the large‐scale oceanic frontal zonesJournal of Geophysical Research: Oceans, 1996
- Shear Test on Snow Explained by Fast MetamorphismJournal of Glaciology, 1982
- Mechanical behaviour and structure of snow under uniaxial tensile stressJournal of Glaciology, 1980
- Slab avalanche measurementsCanadian Geotechnical Journal, 1977
- Direct Simple Shear Tests on Snow and their Relation to Slab Avalanche FormationJournal of Glaciology, 1977