Design and nonlinear modeling of a large-displacement XYZ flexure parallel mechanism with decoupled kinematic structure
- 1 November 2006
- journal article
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 77 (11) , 115101
Abstract
This article proposes an XYZ flexure parallel mechanism (FPM) with large displacement and decoupled kinematic structure. The motion range of the large-displacement FPM using notch hinges is more than 1mm and is achieved by assembling the typical large-displacement prismatic joints and a new large-displacement prismatic joint proposed in this article. Moreover, the decoupled XYZ stage has small cross-axis error and small parasitic rotation. An exact nonlinear modeling method for the typical prismatic joint and the new type of prismatic joint is presented. Using the proposed nonlinear method, the stiffness and dynamics of the XYZ FPM are studied. Comparison between the pseudo-rigid-body and the proposed nonlinear methods is performed on the prismatic joints and the XYZ FPM. To verify the proposed nonlinear modeling method, experiments are conducted to study the linear stiffness of the prismatic joint. The stiffness and the natural frequency of the XYZ FPM are also obtained from the experimental data. The cross-axis error and the parasitic rotation of the XYZ FPM are measured. The experimental results show that the proposed XYZ FPM achieves large displacement and decoupled motion, and the proposed nonlinear method is valid for the flexure mechanism.Keywords
This publication has 10 references indexed in Scilit:
- Type Synthesis of 3-DOF Translational Parallel Manipulators Based on Screw TheoryJournal of Mechanical Design, 2004
- Analytical model of displacement amplification and stiffness optimization for a class of flexure-based compliant mechanismsComputers & Structures, 2003
- Development of a piezoelectric actuator using a three-dimensional bridge-type hinge mechanismReview of Scientific Instruments, 2003
- Tilted folded-beam suspension for extending the stable travel range of comb-drive actuatorsJournal of Micromechanics and Microengineering, 2002
- Flexures2000
- Inverse kinematic modeling of a coupled flexure hinge mechanismMechatronics, 1999
- An ultra-precision XY/spl theta//sub Z/ piezo-micropositioner. I. Design and analysisIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1999
- Prediction of the First Modal Frequency of Compliant Mechanisms Using the Pseudo-Rigid-Body ModelJournal of Mechanical Design, 1999
- An ultraprecision stage for alignment of wafers in advanced microlithographyPrecision Engineering, 1997
- Optimal design of a flexure hinge based XYφ wafer stagePrecision Engineering, 1997