Using Response Surface Methodology Approach to Modeling and Optimization of the Combustion Process in Cement Kiln
- 5 May 2024
- journal article
- research article
- Published by Wiley in Chemical Engineering & Technology
- Vol. 47 (6) , 875-886
Abstract
In this study, this process has been modeled and optimized using the design of experiment technique and response surface methodology (RSM). The RSM was employed to optimize the combustion process in the cement kiln. Kiln feed (X1 = 160–190 t h−1), fan speed (X2 = 840–870 rpm), kiln rotational speed (X3 = 2.8–3.4 rpm), kiln fuel rate (X4 = 3800–4150 L h−1), calciner fuel rate (X5 = 5700–6200 L h−1), pressure of kiln inlet (X6 = 98–102 Pa), and limestone saturation factor (LSF) (X7 = 94–95.8 %) as independent variables were investigated. The carbon monoxide and the kiln body temperature in RSM were considered as response variables. The absolute average error in the model predictions for the combustion process in the cement kiln, for the kiln body's temperature, is about 1.6 % and for carbon monoxide is about 15.5 %.Keywords
This publication has 20 references indexed in Scilit:
- Hybrid model of a cement rotary kiln using an improved attention-based recurrent neural networkISA Transactions, 2022
- Propane steam reforming over promoted Ni–Ce/MgAl2O4 catalysts: Effects of Ce promoter on the catalyst performance using developed CCD modelInternational Journal of Hydrogen Energy, 2019
- Statistical modeling and optimization of the combustion efficiency in cement kiln precalcinerEnergy, 2018
- Sensitivity analysis and multi-objective optimization of CO 2 CPU process using response surface methodologyEnergy, 2017
- Numerical simulation of oxy-coal combustion in a rotary cement kilnApplied Thermal Engineering, 2016
- Evaluating CO2 emission performance in China’s cement industry: An enterprise perspectiveApplied Energy, 2016
- CFD modelling of meat and bone meal combustion in a cement rotary kiln – Investigation of fuel particle size and fuel feeding position impactsChemical Engineering Science, 2015
- Artificial neural network and response surface methodology modeling in mass transfer parameters predictions during osmotic dehydration of Carica papaya L.Alexandria Engineering Journal, 2013
- Air gap membrane distillation: Desalination, modeling and optimizationDesalination, 2012
- Model predictive control of a rotary cement kilnControl Engineering Practice, 2011